Part Number: TPS61016 I am using the TPS61016DGSR to boost a 3.0V battery up to 3.3V. We have taken great measures to reduce the quiescent current as low as possible to achieve long battery life out of the product. Even though the average input current…
Part Number: TPS61016 Hi
I am trying to design battery unit system with two AA cell with output current of 3.3V, I would like to know how to calculate output current with different vin(as battery discharge.)
Thanks
it is very old device and i don't aware a known issue of this failure mode.
the failure seem to be caused by the high voltage spike in SW pin or BAT pin. (by the way, is the inductor removed when measure the SW to GND resistor). please share the schematic…
Which schematic in the datasheet are you using? There are several.
Which PCB are you testing on, your own or the EVM? You could order the EVM and try your test on there which has a known good layout.
Can you provide some scope pictures of what you…
Other Parts Discussed in Thread: TPS61016 , TPS61010 I have a customer that has been using the TPS61016, which has an abs max 3.6V input voltage rating. They use two alkaline batteries.
They want to be able to tell their customers that they can use…
Hi Nedhi:
It's not recommended to parallel. And tps61016 may not has enough current capability for your case.
You could apply the sample at ti.com or contact the distributors.
TI Authorized Semiconductor Distributors: www.ti.com/.../distributors…
Other Parts Discussed in Thread: TPS61016 , TPS61201 , TPS61200 , TPS61070 Hi All,
some questions about the 6101x which I have to evaluate:
1. Can I connect the output of a LDO directly to Vout of the 6101x if the EN PIN is High or LOW without causing…
