Part Number: TPS61030EVM-029 Other Parts Discussed in Thread: TPS61030 Hello,
I am testing a TPS61030EVM and we need the voltage output to be ~5.15V. The installed R3 and R4 result in a voltage output of 5V. For testing, there is a 30Ohm load on the output…
Part Number: TPS61032 Other Parts Discussed in Thread: TPS61030EVM-029 , TPS61023 , TPS61030 Hi, With reference to the Case CS0634034 and CS0558572 here is my updated design. I request you to have a look at the layout. I tried to match it with TPS61030EVM…
Hi Jasper,
I am working on a project that takes mechanical energy and converts it to electrical energy. I want to use this converted energy to charge batteries and drive other consumer electronics devices. The conversion yields a voltage anywhere from…
Hi Kai,
you can apply TPS61030EVM-029, which is for QFN package, same package as in your system board.
the Q1 circuit in the link is not the same as in your schematic.
you can use the components as in your schematic. could you share the part number…
I would prefer to go a little higher with the discrete resistor, maybe 50 mOhm. And please follow the datasheet typical circuits--a small 2.2uF ceramic near the device with the larger tantalum hanging on the bus.
Yes, the ESR of ceramics is essentially…