Search tips
Showing 12 results View by: Thread Post Sort by

  • TPS61033-Q1: TPS61033-Q1 issue support

    Part Number: TPS61033-Q1 We are currently using the TPS61033QDRL-RQ1 boost converter IC in our GNSS receiver project. Below are the input and output specifications of the device: Input Voltage: 2.5V to 3.7V DC Input Power Source: 3.2V / 50Ah battery…

  • TPS61033-Q1: TPS61033-Q1:

    TI Thinks Resolved
    Part Number: TPS61033-Q1 Other Parts Discussed in Thread: TPS61022 Hi team, I'm working on developing a booster circuit for an application and need some guidance. We require a booster that can accept an input voltage ranging from 2.2V to 4.2V and provide…

  • TPS61033-Q1: Enable logic input for how long time

    TI Thinks Resolved
    Part Number: TPS61033-Q1 Tool/software: Enable logic input. Logic high voltage enables the device. Logic low voltage disables the device and turns it into shutdown mode. →how long is needed about Logic high voltage and Logic low voltage time

  • TPS61033-Q1: Request Weight

    Part Number: TPS61033-Q1 Tool/software: Dear Supplier, Kindly provide the weight details of the following part Number: TPS61033QDRLRQ1

  • TPS61033-Q1: Time between pulling low EN pin and Vout start to drop

    TI Thinks Resolved
    Part Number: TPS61033-Q1 Tool/software: Hello team, My customer wants to know how long it takes between pulling low EN pin and Vout start to drop? Thanks! Regards, Daniel Wang

  • TPS61033-Q1: The issue of Bode diagram

    Part Number: TPS61033-Q1 Tool/software: Hello team, About TPS61033-Q1,we use to boost 3.3V to 5.15V in our system. The design shown below. It shows that the Gain and Phase crossover 0 several times no matter 0.5A,1A or 1.5A load. We have confirmed…

  • TPS61033-Q1: Input and Ground Shorts at power ON

    Part Number: TPS61033-Q1 Other Parts Discussed in Thread: TPS61033EVM Tool/software: Hello, I am using a TPS61033DRLR to boost an input voltage of 3V to 5V. I have connected the circuit as recommended by the datasheet however when I apply 3V to the…

  • TPS610333-Q1: How to understand pass-through mode

    TI Thinks Resolved
    Part Number: TPS610333-Q1 Other Parts Discussed in Thread: TPS61033-Q1 Tool/software: Hi team, I have a question about TPS61033-Q1, if it can work at Vin=5v and Vout=5V? For Boost topology, I think we must have Vin<Vout, so that i can work in normal…
    • Answered

  • TPS61088-Q1: TPS61088-Q1

    Resolved
    Part Number: TPS61088-Q1 Other Parts Discussed in Thread: TPS61033-Q1 For TPS61088-Q1 MPN design requirements are Vin=3.3V , Vout=5V , Iout=3A. As per WEBENCH ® Design Report duty cycle is 39.526 %. Is there any duty cycle recommendation for above mentioned…
    • Resolved
    • Answered

  • TPS61378-Q1: TPS61378-Q1

    Resolved
    Part Number: TPS61378-Q1 Other Parts Discussed in Thread: TPS61033-Q1 Hi Team, Kindly Review the attached Schematic circuit for TPS61378-Q1 and provide the feedback Below mentioning the design details, Input Voltage - 4.1V(Max) and 2.3V (Min)…
    • Resolved

Didn't find what you are looking for? Post a new question.