Part Number: TPS61041-Q1 Other Parts Discussed in Thread: TPS61041TPS61041-Q1 has load current rating of 250mA, I need to design a circuit with load current 120mA, but with the calculation which was mentioned in
Datasheet, I'm not able to meet 120mA…
Part Number: TPS61096A Other Parts Discussed in Thread: TPS61041 , Hi Expert,
This is Koki Tsushima.
My customer will evaluate EVM of TPS61096A, but wants to know why this efficiency lower than TPS61041 at Vout 12V, Iout 1mA ?
As fig.1 that efficiency…
Part Number: TPS61041 Hi,
I am inspecting TPS61041QDBVRQ1 which shows a top marking that I have not seen before. (red arrows)
Usually TEXAS top marking are in dashes, however, this part is in blocks.
I have attached pictures to show the difference (circled…
Part Number: TPS61041-Q1 Hi Team,
Usually I see a dash ' - ' for binary markings but now I see a bar ' l ' binary marking
I cannot find any PCN for the changes.
Beat Regards, Tom Liu
Hi Zack,
customer have a concern about the SW transients. The TPS61041 is used in mass production project, measured the SW waveform, sometimes, the low level of SW will be -420mV,see the below. does it have risk in application? thank you
Part Number: TPS61041 If I want to change the voltage output, can I connect a potentiometer to the voltage divider and adjust while enabled?
It would likely be a digitial potentiometer that changes resistance at close to 100 Hz - would that interfere…
Part Number: TPS61041 Other Parts Discussed in Thread: TLV61046A , Hi Team,
One of my customer is considering TPS61041 or TLV61046A for 3.3V to 12V/100uA-1mA conversion. TPS61041 is with less Iq but don't have test data for 100uA output in datasheet, can this…
Part Number: TPS61041 Hi ,
TPS61041 is being used to drive 8 LEDs in series however seeing the case where the the output does not reach the expected voltage. The resistor divider is 2M for R1 and 100K for R2 to give an output around 25V. Instead seeing…
Part Number: TPS61041 Hi TI Expert,
We are now using TPS61041DBVR, we want to know its material content: here is the search result on https://www.ti.com/materialcontent/en/search?partType=tiPartNumber&partNumber=TPS61041DBVR
Below is the result with…
Part Number: TPS61041 Tool/software: WEBENCH® Design Tools I'm trying to see how well a TPS61041 will work for providing a 13V input for an OLED from a lithium polymer battery (2.8-4.2V input). Based on some experimentation with the OLED that I want…