Part Number: TPS61163A Other Parts Discussed in Thread: LM36274 Dear, Sir.
My customer is considering to realize 1 to 2 seconds flashing applying TPS61193A.
The flashing will be executed after TPS61193A start-up.
VIN condition & brief configuration…
Part Number: TPS61163A Dear, Sir.
My customer is considering to apply TPS61163A as bach-light driver for Smart Phone.
They don't want to use "EasyScale interface" because their system only has PWM signal.
The other side, they are expecting…
Part Number: TPS61163A Hi,
We got a question from customer about TPS61163A. Could you help us?
[Question] - Our customer would like to check phase margin and gain margin. Could you let us know resistor insertion point?
Best Regards, tateo
Part Number: TPS61163A Hi, Team,
My customer want to use the easyscale dimming mode in mobile application. They have some concern about the easycale mode, could you help clarify it? Thanks!
For mobile application, they use the CPU to control the I/O to…
Other Parts Discussed in Thread: TPS61163A Hi team,
Please help to confirm the characteristics of TPS61163A. Thanks.
1. Can TPS61163A support minimum 0.5% PWM Duty Application?
2. What is the steady switching Ipeak current and max boost switch current…
Other Parts Discussed in Thread: TPS61163A Hi,
My customer has question about TPS61163A. Could you help us?
Q: How much is the maximum voltage of comp pin?
Best Regrds,
tateo
Other Parts Discussed in Thread: TPS61163A , TPS61163 1.problem – TPS61163A output voltage is drop. 2.cause – SW voltage is measured OVP level on turn on test with min dimming. TPS61163 OVP -> latch -> LED off -> smart phone LCD off.…
Other Parts Discussed in Thread: TPS61163A Hi,
My customer has question about TPS61163A. Could you tell me about questoin?
[Question] How much is the Iq under the following test condition?
- Test Condition - Device enable, switching 1.2MHz and full load …
Other Parts Discussed in Thread: TPS61163A , TPS61163 Hello, Could you please let me know the difference between TPS61163A and TPS61163? Best Regards, Ryuji Asaka
Other Parts Discussed in Thread: TPS61163A Hi, I have TPS61163A and I like to check with you if I'm using it correctly.
I have a boost that connects to a series of 10 backlight LEDs that I sink through IFB1.
Then I have another 2 LEDs that are parallel…