Part Number: TPS61165 Tool/software: We are using nxp imx8mp SoM with Yocto Kirkstone Kernel 5.15.75. There is no such driver for TPS61165 in kernel 5.15.75 so we used your published https://git.ti.com/cgit/mlp-open-source/kernel/tree/drivers/video/backlight…
Part Number: TPS61165 Tool/software: Hi,
I would like to know if there is any easy way to add a protection for short circuit between led+ and led-? It happens quite too often that we destroy either the diode or Rset during the assembly process. Below…
Part Number: TPS61165 Hi team,
I am considering inserting a common mode choke coil because I am concerned about radiated noise. Is there any problem if I insert this into the output? The coil is NRS6028T150.
Sincerely, Ryu.
Part Number: TPS61165 Hi Sir,
My customer have read the procedure from the datasheet to have the LED driver in PWM mode. The section relatively unclear about the "startup delay" timing.
What they have done so far is power up the backlight through…
Part Number: TPS61165 Other Parts Discussed in Thread: TPS61169 Hi
Could you refer to the following specifications and help recommend suitable products
The input voltage can be either 5V or 12V.
Application: Industrial control box (including motherboard…
Part Number: TPS61165 Hi,
We are using TPS61165 as our LED driving circuit.
We observed that there is inrush current after we attached the LED Bar on V_ISO_LED+/V_ISO_LED-
this inrush current will have a chance to destroy our LED bar.
Is the inrush…
Part Number: TPS61165 In the attached image for the inductor "L30", we are used the part "GLFR1608T100M-LR" which is 0603 package. Kindly give us the confirmation for this. Or else please suggest us the alternate part number of 0603 package which supports…
Part Number: TPS61165 Other Parts Discussed in Thread: TPS92200 Hi
Attached is the datasheet of the 3.5” Panel Is there a suitable LED Driver?
1.Vin: 6V~35V
2. Current: 100Ma(MAX)
3.LED
AT-T035QHI-28 sepc.pdf
Part Number: TPS61165-Q1 Other Parts Discussed in Thread: LP8865X-Q1 Hi
TPS61165TDBVRQ1 this is part number we are using it .Iam using input of 15v and output we are using 30v and 250 MA.IC is heating up 100 C we are using two lamp and two led drivers…
Part Number: TPS61165-Q1 Other Parts Discussed in Thread: TPS61165 , USB-TO-GPIO2 Tool/software: Hi all
I recently purchased the TPS61165EVM-283 and I'm encountering some difficulties with the software and device configuration.
There was not a software…
