Part Number: TPS61170 Hi,
Is there any difference between the TPS61170DRV and TPS61170DRVG4? I see this is another part number under the ordering options for the TPS61170 and i don't see this as a separate device on the website. Can you confirm if I…
Part Number: TPS61170 Hello,
Our customer has verified TPS61170 internal Error amp transfer function by using open loop connection.
When change Vin voltage around 4.9V, there is "a dead point" at that voltage suddenly reduce voltage gain of Error amp…
Part Number: TPS61170 I am using WEBENCH Power Designer.
I can add waveforms on the form via "ADD WAVEFORMS" after simulation.
But, how can I delete them, without running a new simulation?
Attila
Part Number: TPS61170 Hi ,
We are using TPS61170 in our project application . The FB voltage at the pin is occuring to be 0.573V, at the following input conditions --> Vin = 6.5V; CTRL = 3.3V.
However Boost operation is not performed, and the output…
Part Number: TPS61170 Hi ,
Soft start timing as mentioned in the datasheet is 6.8ms , but in our validation , we are observing a value of around 8 ms under the operating condition of Vin= 6.5V and CTRL = 3.3V
Part Number: TPS61170-Q1 Greetings of the day!!!
I'm trying to calculate conduction, switching and gate loss for which I need value for Mosfet (Qg, rise and fall time).
Kindly, provide me with values.
Thanks in advance
With regards,
Rajiya
Part Number: TPS61170-Q1 Hi All,
I am planning to use TPS61170-Q1 1.2-A High-Voltage Boost Converter with following requirement specs: Input voltage - 12V +/-10% (10.8V to 13.2V)
Output voltage - 32V +/-5%
Output current - 5mA to 60mA
Operating range …
Part Number: TPS61170-Q1 Other Parts Discussed in Thread: TPS61088-Q1 , TPS61170 , LM5155-Q1 Hi Team,
TPS61170-Q1 was evaluated on a automotive customer. Do we have EMI test report for TPS61170-Q1?
Could you give us some suggestion on the layout and schematic…