Part Number: TPS61175 Hi,
I am using tps61175 in my design. I am using this regulator for 5V to 12V conversion. I am using this regulator to drive an LED driver circuit for an LCD backlight. The LCD backlight will be controlled by a PWM signal. So the…
Part Number: TPS61175-Q1 Hi team,
Does maximum duty ratio chance due to the Switching frequency?
If yes, are there any data of Maximum Duty ratio vs. Fsw?
Best regards,
Yuto
Part Number: TPS61175 Other Parts Discussed in Thread: LM5155 TPS61175 support team,
I would like to design the isolated flyback circuit using TPS61175 based on the following system requirement.
Input Voltage = 5V
Output Voltage = 12V
Output…
Part Number: TPS61175-Q1 I've tried using the unencrypted PSPICE model in my own circuit with my own PSPICE, and I've tried using TI's encrypted model and circuit and TI-PSPICE, but the result is the same. The simulation runs for 10+ minutes, indicates…
Part Number: TPS61175 Other Parts Discussed in Thread: TPS61089 Hi,
We are planning to use TPS61175 for an output of 12V/ 1A from 5V input.
We have to test our system for EMI/EMC.
Please let me know Is there any additional components that we have…
Part Number: TPS61175 I have revived question from customer.
In the data sheet, the ripple voltage is specified by the output capacitor of TPS61175.
However, it seems that the calculation formula and the measured waveform are different.
When Vin…
Part Number: TPS61175 Hi team,
Our assigned customer considers to use TPS61175QPWPRQ1 instead of TPS61175PWPR due to supply issue. I have questions about this.
1) Are these have same die? Just a difference at test process and qualification process…
Part Number: TPS61175
Dear TI Team
I have a question about the Current Iimit of TPS61175. In the data sheet of TPS61175, the minimum value of N-Channel MOSFET current limit is described as 3A, but if you look at the conditions, it is described as…
Part Number: TPS61175 Hi Team,
My customer want to know if the unencrypted PSpice transient model or TINA transient model of TPS61175 could be used in SIMetrix to simulate.
If could, could you provide a guide document for how to simulate?
Thanks…
Part Number: TPS61175 Other Parts Discussed in Thread: TPS25200 Hello,
I noticed that despite that in the datasheet it is specified that the soft start pin is getting discharged with 5k if the device is disabled, I did not observe this on our circuit…
