Part Number: TPS61235P Tool/software: Hi Team,
May I have your support to provide comparison table between TPS61235P and TPS61022RWUR?
Customer is evaluate them in E-cig application, function is that boost the voltage of cell and act as input of…
Part Number: TPS61235P Other Parts Discussed in Thread: BQ24170 ,
Tool/software:
We have a product that is essentially a USB battery pack - it's a large 99Wh lithium ion battery pack, charged via 5v USB using a BQ24170 charge IC.
The output is boosted…
Part Number: TPS61235P Tool/software: Hello there, I am trying to build a 18650 li ion battery powered LED lighting system, the LEDs consume 1.3A as a board. I used TPS61235P for boosting the input level and did my calculations on 5.1V fixed supply. …
Part Number: TPS61235P Hello,
Does TI have light load efficiency data for this part? I see that it has a light load PFM mode. Customer is interested in the <1mA range.
Thanks,
Michael
Part Number: TPS61235P Hello,
I want to validate that the design for enabling the TPS61235PRWLR will not leak much voltage and will work properly. Going into the Vin pin with a 1M ohm resistor in series with a switch that when it is turned on it will…
Part Number: TPS61235P I have built a small circuit board with a TPS61235. The schematic I use was identical to that shown on the spec sheet for the TPS61235. I laid out the printed circuit card exactly as shown on the spec sheet. However, when I apply…
Part Number: TPS61235P Hi,
Please review my schematic below
The voltage and current will come from a LIPO Battery(3.7V/6000mAh). I'd like to boost converter to output 5.1V and 3A max as my output will be going to my load which will be a Raspberry…
Part Number: TPS61235P Other Parts Discussed in Thread: TPS22965 Hi Team,
According to our customer, the output voltage of TPS61235 drops to 2V when connected to a 2.5A load. Please see the details of his inquiry below.
I'm currently developing a…
Part Number: TPS61235P Hi,
I want to use the TPS61235 boost converter to step up voltage coming from a lipo battery that would be attached to a battery charger IC that has a power path feature which is where the input of the TPS61235 would come from…
Part Number: TPS61235P Hi Guys,
I trust you are well.
I'm using the TPS61235 as part of an IOT board.I'm powering the converter from a 3.7v 21700 5Ah LiPo battery. The schematic is attached below:
I have done the following checks so far: …
