Part Number: TPS61253 Hello there,
I am using the step-up TPS61253YFFR with a fixed 5V output voltage.
Could you please give me a review regarding my schematics? Above all, I'm not sure whether I can leave the BP pin like that or whether it has to be connected…
Part Number: TPS61253 Other Parts Discussed in Thread: BQ25895 , , Hello all, I am using TPS61253 Boost IC to boost 3.8V from 375mAH Li-Ion battery to operate a load of 2A and also charge the backup Li-Ion battery of 115mAH using BQ25895 chip. Looks like…
Part Number: TPS61253 Hi expert, could you suggest some device to displace MP3120 and MP3410? That's great if you could give a comparative list of these devices to show TI benefits, Thanks!
MP3120 datasheet: https://www.monolithicpower.com/en/mp3120…
Part Number: TPS61253 Hello,
The datasheet for the TPS61253 calls out a paste aperture design that is slightly odd to us. It recommends that it should be square with rounded corners, not just a round aperture. We are using another device very similar…
Part Number: TPS61253A Other Parts Discussed in Thread: TPS61253 , , TPS61259 Hi,
I have a problem with TPS61253/61259 boost converter.
I was using this IC for about two years without any problem. Last time I ordered new batch of the TPS61259, installed…
Part Number: TPS61253 Other Parts Discussed in Thread: TPS61230 Hello,
I read that one can use a voltage divider hooked up to the EN pin to automatically disable it when my battery is at 3V. I am having trouble figuring out what resistors i will need for…
Other Parts Discussed in Thread: BQ25100 , LP38690 , TPS61253 Hi, All!
I attach a schematic file. 3343.POWER.pdf
That is used TPS61253, LP38690 and BQ25100 for wearable device.
Please, Reviwe & comment , ASAP.
Best Regards,
Inho Jeon
Other Parts Discussed in Thread: TPS61253 Hi all,
I tested the tps61253evm board, input voltage Vin 4V, EN = 1.
At output load Iout smaller than 180mA, Vout was stable at about 5,17V. When I raised Iout to around 300mA, the output voltage Vout fell down…