Part Number: TPS61288 Other Parts Discussed in Thread: MC33063A-Q1 Hi, I need help for below questions:
1. What's the difference between TPS61288L and TPS61288?
2. we have a LCD backlight power supply project. The Vin is battery (8V~15V), The Vout…
Part Number: TPS61288 Added this part to our BOM and reused the example circuit, replacing a resistor to make 8V output instead of 12V output. We are only getting 3.7V output, which is the same voltage that is the input of this boost.
Part Number: TPS61288 Hi team,
Input 3.6V, output 12V.
Everything is OK in PFM mode. When the load is increased, more than 1 a of current is output, the inductor whistling (inductance is 104CDMCDS-2R2MC as recommended in the data sheet) and the output…
Hi Zuhaib,
According to your application requirement, I agree with Fergus's words. TPS61288 and TPS61022 are both ok. But TPS61022 is more suitable because the current limit of TPS61288 is too large which will need you to choose inductor with higher saturation…
Part Number: TPS61288 Hi team,
In the original thread, output voltage is existing when EN=OFF. Can the customer drive LED (20~30mA) from this output?
Regards,
Hayashi
Part Number: TPS61288 Other Parts Discussed in Thread: TPS61376 , TPS61170
Please suggest any changes required.
input - 9-15V
output - 18V at 4-10ma
Additionally, Is it possible to reduce the inductor size?
Part Number: TPS61288 Hello,
is it possible to deliver a little current out of the internal 5V LDO (VCC pin) for some other circuitry?
Thanks in advance for any information
Part Number: TPS61288 Other Parts Discussed in Thread: LMR62014 , , TPS61046 Hello,
I currently use a TPS61288EVM-064 in standard configuration and an output voltage of 15V. I connected 4700uF directly to the output of the Booster. As soon the voltage…
Part Number: TPS61288 Hi team,
Customer notice Vout is +3.65V with Vin=+4V, EN pin=LOW. I think output is 0V because TPS61288 is Synchronous Rectification. Is it a correct behavior?
Regards,
Hayashi