Part Number: TPS61378Q1EVM-060 Hi Team,
This Query is regarding TPS61378Q1EVM-060 PG Pin.
We dont have the application of PG from TPS61378Q1EVM-060 in our design.
Q)is there any functional impact if we keep the PG pin open for TPS61378Q1EVM-060…
Part Number: TPS61378Q1EVM-060 Other Parts Discussed in Thread: TPS7A4701EVM-094 , Hi team,
Can you provide information on the external dimensions of the TPS61378Q1EVM-060 and TPS7A4701EVM-094
Regards,
Part Number: TPS61378Q1EVM-060 Dear Team
Customer want to know which orderable device correspond TPS61378Q1EVM-060.
Could you help to find the correspond number?
The U1's part number of TPS61378Q1EVM-060 is TPS61378QRTE.
many thanks
Den…
Hi Gilberto,
The 1uF or 2.2uF is enough for Pin 6 VCC and Pin 10 OUT.
you could refer to our Evaluation Module.
TPS61378Q1EVM-060 Evaluation Module (Rev. A)
Best Regards,
Fergus
Hi Yufang,
Thank you for your feedback.
According to your three different simulation results, although the TINA one seem a little ideal, you can refer to its results. The conclusion we verified on the TI EVM is that TPS61378-Q1 can achieve stable…
Part Number: TPS61378-Q1 Other Parts Discussed in Thread: TPS61378Q1EVM-060 Both the datasheet and the eval board user guide (for the TPS61378Q1EVM-060 Evaluation Module) show the PG pin (pin 11) tied to VCC (pin 6) via a resistor. Can the PG pin instead…
Hi Ruslan,
Firstly, the TPS61378Q1EVM-060 evaluation module uses 470nH inductor while I used 1uH inductor for calculation. With a higher inductance, the ripple would be smaller so maximum output current will be larger.
Do you have 1uH inductor on…
