Part Number: TPS62088 Other Parts Discussed in Thread: PSPICE-FOR-TI Tool/software: Hi,
I need TPS6208833 unencrypted model for an LTSpice simulation.
Please let me know if you can share that with me,
Thanks
Part Number: TPS62088 Dear Team,
For IC SWITCHING (R3) TPS62088YFPR DSBGA-6 ADJ. 3A HIGH-EFFICIENCY STEP-DOWN TI surface scratch issue,
is it okay for TI failure analysis process? how to confirm if this component itself is GOOD or NG in terms of function…
Part Number: TPS62088 Other Parts Discussed in Thread: TPS628513 As per datasheet, recommended is 2x10uF or one 22uF
let's assume for 3.3V output voltage. Customer is currently using 2x10uF . What if 5cm away there is an IC, that "requires" 100uf of…
Part Number: TPS62088 Other Parts Discussed in Thread: TPS62840 Hi, I have made a simple evaluation PCB with the TPS6208833YFPT. As soon as the input is 3.35V the iQ is 5.9uA which is a bit higher then expected but ok. But as soon as the input is lower…
Hi Hale,
Any updates from your end?
The efficiency numbers you shared looks realistic when using TPS62088 in an IBB config. To get a better efficiency, the losses need to be reduced.
There could be some improvements if you change the frequency or inductor…
HI Ohad,
Sorry for inconvenience , Unfortunately, currently it is not prioritized and there is no active work going on to resolve infrastructure issue. It might take longer time to prioritize and fix this issue.
Thanks & Regards,
Praveen
Part Number: TPS62088 Other Parts Discussed in Thread: TLV62585 , TPS62865 , TPS62826 Hi Team,
Could you suggest a fit device for the requirement below? I suggested TPS62088 and TLV62585 for customer, but they want a larger package with a better thermal. Ta…
Part Number: TPS62088 I'm using the above part in my design and would like TI to review the design. I prefer email or personal messages instead of sharing in the forum.
Part Number: TPS62088 I'm using the above part in my design and would like TI to review the design. I prefer email or personal messages instead of sharing in the forum.
Part Number: TPS62088 Hi,
Customer would like to use 1.2V LDO output for EN of TPS6208833.
In the datasheet, VIH(min) = 1.0V.
Can 1.2V enable TPS6208833 without any tolerance issue?
Thanks.