Part Number: TPS62090-Q1 Hi,Sir:When designing the WIFI communication module, we used TLV62569PDDCR as the PA power supply (1.8V 500mA), but the performance was not satisfactory (the EVM index was poor at 11AX 80M MCS11 mode with a power of 12dbm). After…
Part Number: LM76005-Q1 Other Parts Discussed in Thread: TPS62090 , LM76005 Tool/software: Hi，
Please help review the power supply design for LM76005 and TPS62090. Thank you.
LM76005-TPS62090.pdf
Part Number: TPS62090 Tool/software: Hi Team,
Im planning to use the TPS62090RGTT part with Vin=3.3V, Vout=1V, with 600mA load current. The Fsw will be 1.4Mz tied to Vin. the datsheet shows the max Inductor L=2.2uH with 22uF caps, do we need to take…
Part Number: TPS62090-Q1 Tool/software: Can the PG pin drive a RESETn signal? or DO I need to add a buffer? Logic will be PG=High, resetn=High and when PG=low, RESETn=low.
Part Number: TPS62090-Q1
Tool/software:
Hi Team,
Could you please help to clarify what is the different between RJB and RJCbottom? Why RJCbottom is so low?
If we want to input the RJB into thermal simulation tools, which one should we refer? …
Part Number: TPS62090 Hi Everyone,
For Our Upcoming Project We are intended to use TPS6209x Synchronous Buck Converter a whether this IC will be in Production for the Next 7-8 Years.
Part Number: TPS62090-Q1 Tool/software: Hi team,
My customer finds the PWM mode switching frequency of TPS62090-Q1 is 2MHz in their test, which should be 2.8MHz from the datasheet. The test condition are [Vin=3.3V, L=1uH, Vo=1.8V, Io=0.55A] and [ Vin…
Part Number: TPS62090 We using TPS62090 DCDC to step-dow the Input from SMPS (5.0-5.6V 2A) to 3.2V. We pull up the Freq by 390k ohm to make TPS62090 operate in 1.4MHz mode. EN pin is connected to Vin directly.
In SMPS spec. , Vout max(no load) is 5…
Part Number: TPS62090-Q1 Hi team
I would like to get your confirm that are there any other differences between TPS62090QRGTRQ1 and TPS62090RGTR besides AECQ qualification/test?
