Part Number: TPS62160EVM-627 Dear,
our client test TPS62160EVM-627, and we operating condition:
VIN:6V
Vout:3.3V
Iout:0.08A
and We measurement EVM TP1 waveform as below chart, is normal?
2. measurement EVM TP1 waveform as below chart , is…
Part Number: TPS62160EVM-627 Other Parts Discussed in Thread: TPS62160 Have tried Eval board for the TPS62160
Board has divider R1 (1.21M) and R2 (383k) and supposed to hold 3.3V regulated output with wide input voltage 4 - 12 V Was working OK.
When…
Other Parts Discussed in Thread: TPS62160EVM-627 , TPS62160 , TPS62125 , TPS62150A , TPS62150 , TPS62130A I got the TPS62160 EVAL board TPS62160EVM-627, and tested its power good output, found it can't maintain low when power is off (refer to attached…
The EVM for this family is here: www.ti.com/.../tps62160evm-627
You can use the EVM and/or data sheet test circuit (Figure 4) as a starting point for your design.
Other Parts Discussed in Thread: TPS62160 Hello,
TPS62160 appears to have switching jitter at low input voltage and high duty cycle. The below conditions and measurements were made on the TPS62160EVM. Output voltage was set to 3.3V. This same behavior…
The first steps would be checking your schematic and layout versus the D/S recommendations and the EVM.
If you just want a working board to test on, the EVM is available here: http://www.ti.com/tool/TPS62160EVM-627
