Other Parts Discussed in Thread: TPS62175 We have questions about TPS62175.
Question 1.
Do you have the data about output characteristics of overload?
For example, waveform or graph of output voltage and output current in overload.
Question 2.
Output…
Part Number: TPS62175 Dear, Sir.
My customer is designing their system applying TPS62175, now.
They have one question about Output Accuracy.
It is defined on the datasheet as ±1.8% at PWM mode.
Is it included the tolerance of external resistor…
Part Number: TPS62175 Other Parts Discussed in Thread: LMR36006 We are using TPS62175DQCR chip in our products to get 3.3V. In one of our product (in development stage ) the input voltage can go up to 21 V. When the input voltage is around 18V the chip…
Part Number: TPS62175 Dear support member,
My customer used TPS62175.
I have a question.
When opening and shorting the FB terminal resistance with TPS62175, there is a question about VOS operation.
Q1 When the FB terminal resistance is opened and shorted…
Part Number: TPS62175 *** ref:QAEAAB9 ****
Hello,
would there be a through-hole socket adapter available for the SMD WSON-10 package of this regulator to avoid soldering the part itself?
Thank you very much.
Best regards
Adnan
Part Number: TPS62175 Hi,
There was IC damage issue.
Condition is 1.8V output and 0.5A.
When input is above 20V, IC damage occured.
I thought it was related to minimum on time.
On time is 90ns at 1MHz switching frequency and minimum on time is typically…
Part Number: TPS62175 Hi I am using TPS62175 buck Regulator.
My input is 15V and Output is 3.3V , Sch is same as shown on page 1 of datasheet ( http://www.ti.com/lit/ds/symlink/tps62175.pdf
Inductor is 10uH with 1A rating.
Test 1 :- Output Short ,
Method…
Part Number: TPS62175 Hello, we are using the TPS62175 as an inverting power supply. We are using it in two configurations. One of the configurations is working and the other is not.
Below is a configuration that is working. That is:
VIN = 12V
Expected…
Other Parts Discussed in Thread: TPS62175 Dear Specialists,
My customer is confirming TPS62175 by using WEBENCH and has a question.
I would be grateful if you could advise.
---
When I made a design file, connection point of the circuit disappeared.
…
