Part Number: TPS62180 Tool/software: Please let me know how the converter will react if one phase inductor is missing, is it the load dependent?
In case of some loading, will the internal current-balancing cause internal logic to react on some specific…
Part Number: TPS62180 Tool/software: Hi team,
Could you let me know the minimum value of Thermal Shutdown (Rising junction temperature=160℃(Hysteresis20℃))? When my customer's system is operating, TPS62180YZFR suddenly output PG=low and the output voltage…
Part Number: TPS62180 Hello, I had a look through the data sheet for this series of chips
https://www.ti.com/lit/ds/symlink/tps62180.pdf?ts=1649812403497&ref_url=https%253A%252F%252Fwww.ti.com%252Fproduct%252FTPS62180
but could not find any information…
Part Number: TPS62180 Hi team,
I tested TPS62180 and got two questions.
First question: When I use only one phase and run in light load, I can see the other phase switching in a certain frequency, which is about 110kHz. The picture is below, the green…
Part Number: TPS62180 Hi there,
I would like to use the TPS62180 IC for my power application. For layout design, I need to use the STEP model for pcb library. There is no STEP model for it. If possible, would you send it to me ?
Thanks!
Part Number: TPS62180 Hi Team,
please kindly help provide recommend parameters for different Vout.
I see datasheet has Cin/Cout/L selection guide, but it's for a range. My customer hope to get parameters that we think is optimized for different Vout…
Part Number: TPS62180 Other Parts Discussed in Thread: TPS62866 , TPS62480 What is the best way to use a MCU to set the output voltage of this converter? Can I use a DAC connected to FB pin for setting the output voltage? Thanks
Part Number: TPS62180 Other Parts Discussed in Thread: TPS53515 , TPS54824 Hi Expert,
A TPS62180 is used to convert 12V to 5.55V.
A few PCBA were fabricated at different time against the same schematic diagram, the same PCB layout and the same peripheral…
Part Number: TPS62180 Hi team,
My customer is evaluating TPS62180, and he is testing failure events. One situation he assumed is that the VIN and VOUT pins will be shorted, and this caused a damage to external FETs. So he wants to know if this situation…
Part Number: TPS62180 Hi team,
When the failure event occur, the device have two performances, one is Vin=Vout and the other is Vout =0V.
Could you kindly explain under what situation will cause theses two different performance?
Thanks and best…
