Search tips
Showing 22 results View by: Thread Post Sort by

  • TPS62260-Q1: What's the package of sot-23

    Part Number: TPS62260-Q1 Other Parts Discussed in Thread: TPS628501-Q1 Hi Expert, Do we have pin assignment for SOT-23 package like below? Thanks. BR, Elec Cheng
    • Answered

  • TPS62260-Q1: Why 2 package schematics?

    Resolved
    Part Number: TPS62260-Q1 Hello, There are 2 package schematics for SON in the datasheet. DRV0006A and DRV0006D. Why 2? And which package is for which product? Thanks! Regards, Oguri (TIJ automotive FAE)
    • Resolved

  • TINA/Spice/TPS62260-Q1: Looking SPICE model for TPS62260-Q1

    TI Thinks Resolved
    Part Number: TPS62260-Q1 Other Parts Discussed in Thread: TINA-TI , Tool/software: TINA-TI or Spice Models Hello, I want to simulate the TPS62260-Q1 for 5.7V input and output 3.3V, can I get spice model of this? Regards, VC
    • Answered

  • TPS62260-Q1: VIN Ramp-up Rate Limitation

    Resolved
    Part Number: TPS62260-Q1 Dear, Sir. My customer is desgining their system to apply TPS62260-Q1 with EN pin is tied to VIN. At this time, they are asking about the VIN ramp-up rate limitation. 1. VIH/VIL on EN pin are min. 1V & max. 0.4V. It means the…
    • Resolved

  • TPS62260-Q1: Request for Thermal expansion coefficient, Heat capacity, Heat conduction coefficient, Heart flux from IC chip 6 faces data

    TI Thinks Resolved
    Part Number: TPS62260-Q1 HI May i know how to get below data for TPS62260TDRVRQ1 Thermal expansion coefficient, Heat capacity, Heat conduction coefficient, Heart flux from IC chip 6 faces
    • Answered

  • TPS62260-Q1: Does it any problem if VIN-pin voltage is smaller than SW-pin voltage when VIN is turned off?

    Resolved
    Part Number: TPS62260-Q1 Hi Experts, Does it any problem if VIN-pin voltage is smaller than SW-pin voltage when VIN is turned off? [example] VIN=0.1V SW=0.5V I think that a current will flow to VIN from SW through body diode of high side MOSFET. Is it any…
    • Resolved
    • Answered

  • TPS62260-Q1: Start up Time

    Resolved
    Part Number: TPS62260-Q1 Hi, How much does start up time of TPS62260-Q1 depend on temperature(-40℃, 85℃) on below condition? I'm understanding that not only the TPS62260-Q1 but also external components are affected. Best Regards, Kuramochi
    • Resolved

  • TPS62260-Q1: if we can set the value of R2 to 240KΩ？

    TI Thinks Resolved
    Part Number: TPS62260-Q1 hi On page 20 of datasheet, "To minimize the current through the feedback divider network, R2 should be 180 kΩ or 360 kΩ." can we use 240kΩ of R2? Please give your advice Thanks

  • TPS62260-Q1: The input supply current of UVLO condition

    TI Thinks Resolved
    Part Number: TPS62260-Q1 Hi team, I have an question about the input supply current of UVLO condition, if this current is equal to the quiescent current, or less than the quiescent current ？As far as I know,during the UVLO, just the UVLO circuit is working…

  • TPS62260-Q1: The Vout vs Iout under the high temperature of TPS62260-Q1

    TI Thinks Resolved
    Part Number: TPS62260-Q1 Hi The output current of TPS62260-Q1 is defined max 600mA@Ta=25℃ in electrical characteristics. But as long as I see figure12, the output voltage drop as the Iout increase. This device's Vout drop as the Iout increase under…

Didn't find what you are looking for? Post a new question.