Part Number: TPS62262-Q1 Hi expert,
My customer is working on the worst case analysis for TPS62262TDRVRQ1 and need some data, could you please help to share? Thanks.
Minimum leakage current on EN pin
Minimum and maximum of quiescent current at…
Part Number: TPS62262 Hi to all,
Can someone explain the differences between the automotive graded variant and the normal one? One of our customer would like to integrate the TPS62262-Q1 buck for his application (Remote control).
I think there is…
Part Number: TPS62262-Q1 Other Parts Discussed in Thread: TPS62290-Q1 Hi Team, My customer considers to use TPS62262-Q1. However it is possible case for his application output current is 631mA(max). My customer understand TPS62262-Q1 supports up to 600mA…
Hi Mark,
TPS62262-Q1 have start-up time(500us) and internal soft start(250us), the short jittering will have little effect on the enable function.
Best Regards,
Kevin
If this answers your question, Please click "This resolved my issue" button…
Other Parts Discussed in Thread: TPS62262-Q1 Hi
Ta of TPS62262-Q1 is written -40℃～105℃ in the datasheet.
But the parameter of Webench is up to 85℃.
Is datasheet wrong?
Best regards,
Yokota
Other Parts Discussed in Thread: TPS62262-Q1 Hi
I simulated TPS62262-Q1 under Vin=2.7~3.9V, Vout=1.2V, Iout=350mA, Ta=100℃.
But I couldn't simulate it though I was able to do it in bygone days.
Could you tell me this reason?
Best regards,
…
Part Number: TPS62261-Q1 Other Parts Discussed in Thread: TPS62262-Q1 Hi team,
I am calculating the worst case input current of TPS62262-Q1 at 1.8V out.
Vin = 3.3V
Vout=1.8V
Iout = 0.3mA to 100mA
MODE=GND=Power Save mode
Could you give me…
Part Number: TIDEP-01017 Hello, the angular resolution was shown in Table 3 of the following material.
tidueq8.pdf
Azimuth Array and Elevation Array in Table 3 of this document.
Azimuth Array is written as 86 Element Virtual Array, but it is not…
