Part Number: TPS62807 Hi,
I am looking into the Vout impact of the poor VSEL/MODE pin resistor.
The datasheet recommends user design with 1% resistor, so for VSEL level 3, any value between 15.4k(+/- 1%) could be properly read by the R2D converter…
Part Number: TPS62801 Other Parts Discussed in Thread: TPS62802 , TPS62807 Hi team,
Customer is using TPS62801 -> 1V/15mA, TPS62802 -> 1.8V/15mA, input is Li-battery, 3V ~ 4.4V. Since their current output is very small, so they wander if they could…
Hello Youhei MIYAOKA,
Thank you for reaching out,
Youhei Miyaoka said: Is this limit fixed value? If so, please teach me.
Or is this limit value the same as the ILIMF of the power switch between 0.8 and 1.2A?
You can consider ILIMF as the current…
Hi Shriram,
It looks like we don't have a device that can support a 100us output voltage rise time. The fastest rise time that our device (TPS62808) can achieve is 210us but it is limited to 600mA. Please see attached datasheet for reference.
0702…
Hello Saito-san,
TPS62230 is a fixed output voltage where FB pin is directly connected to the output so there is no possibility to implement the capacitor and diode network.
Can your customer use a device in WCSP package? TPS62802 has a soft start…
Part Number: TPS62801 Hi,
I need to use TPS62801 at input voltage 1.8V typical +/-5% and VOUT=1.1V
TPS62801 is not able to have input voltage below 1.8V. I don't find any other reference.
What parameter is not guarantee at 1.7V input voltage ? …
