Search tips
Showing 15 results View by: Thread Post Sort by

  • TPS62825A: Negative output

    TI Thinks Resolved
    Part Number: TPS62825A Tool/software: Dear TI Engineer, We want achieve 3V input and -2V output, the load current is from 1.5A to 2A. The Quiescent current requirement within 10µA. Can we achieve this by reversing the output of TPS62825A? By the…

  • TPS62825A: Question about mounting specs

    Part Number: TPS62825A Tool/software: 1: Can mounting reliability be ensured when the unplated lead sides are not soldered (connected only at the bottom)? 2: If solder connection on the sides is essential, are there any conditions to prevent deterioration…

  • TPS62825A: change the TPS62825A inductor from 0.47uH to 1uH

    TI Thinks Resolved
    Part Number: TPS62825A hi team, We want to double check whether we can change the TPS62825A inductor from 0.47uH to 1uH. Thanks.

  • TPS62825A: What is the recommendation for 3.3V to 0.9V/1.1A application?

    TI Thinks Resolved
    Part Number: TPS62825A Other Parts Discussed in Thread: TPSM82822A , TPS628502 Hi team My customer want a device for the following application: Vin=3.3V Vout=0.9V Load current = 1.1A Priority: 1. Output ripple, 2. Efficiency. 3. Solution size…
    • Answered

  • TPS62825A: Maximum quiescent current under FPWM

    Resolved
    Part Number: TPS62825A Hi Team, My customer is wondering what's the maximum quiescent current under FPWM mode? The datasheet only provide the maxmimum IQ when device not switching. Thanks! Patty Chuang
    • Resolved
    • Answered

  • TPS62825A: 6-VSON-HR and 10-VQFN-HR - Combination SMD & NSMD pad

    Resolved
    Part Number: TPS62825A I would like to know why on your tps62825a (or tps25946 ), you specify an example layout with SMD and NSMD lands. The question is related to the combination of SMD PAD and NSMD PAD in the same layout because I think it is not recommended…
    • Resolved

  • TPS62825A: EMI performance compared to TLV62569A

    TI Thinks Resolved
    Part Number: TPS62825A Other Parts Discussed in Thread: TLV62569A Hi, expert, My customer is using TLV62569A in HMI, but they found the EMI and anti-EFT performance is not so good. We recommended our new device TPS62825A, but customer wonder if the…

  • RE: WEBENCH® Tools/TPS62825A: No Bode Plot simulation option available

    Hi Jim, Please note that we do not enable Bode plot simulation for DC architecture devices and we enable only for current/voltage mode architectures. Thanks and Regards, Atul
    • Answered

  • TPS62825AEVM-126: HICCUP short-circuit protection Anomaly

    Resolved
    Part Number: TPS62825AEVM-126 Other Parts Discussed in Thread: TPS62825A , Tool/software: Hello, I am using the TPS62825AEVM-126 to verify a 0.75V design and for the most part, the design works up until about ~700mA. It appears the hiccup short-circuit…
    • Resolved
    • Answered

  • TPS62825AEVM-126: 1.5V Efficiency

    Resolved
    Part Number: TPS62825AEVM-126 Other Parts Discussed in Thread: TPS62825A , Tool/software: Hello, I am measuring efficiency for a 1.5V design using the TPS62825AEVM-126 and I am calculating an efficiency of about 46% at a load of 30mA. According…
    • Resolved

Didn't find what you are looking for? Post a new question.