Part Number: TPS628511 Hi team,
In the datasheet it is said that the capacitance on the SS pin should be less than 47nF.
My customer would like to use 320nF for elongated soft start.
The tracking is not used and only a capacitor is connected to…
Part Number: TPS628511 Hello TI-Team,
Can I use the SS/TR-Pin to control the load current?
Measure the load current by adding an ext. Opamp as current-controller and feed back the signal to SS/TR-Pin to reduce the duty-cycle.
Best regards,
…
Part Number: TPS628511EVM-139 Other Parts Discussed in Thread: TPS628511 , Tool/software: We are going to make transient responce measurement fot TPS628511 buck converter design. Could you give us please Bode Plot graph for TPS628511EVM-139 evaluation…
Part Number: TPS62A01A Other Parts Discussed in Thread: TPS628511 , TPS628501 , Tool/software: Hi team,
I'm considering adding a CR to the EN signal to slow it down for timing adjustment. Is this acceptable? Is it correct to understand that hysteresis…
Part Number: TPSM828511 Other Parts Discussed in Thread: TPS628511 Tool/software:
Requesting the TPSM828511RDYR Functional Safety FIT Rate, FMD and Pin FMA report.
Part Number: TLV62568A Other Parts Discussed in Thread: TPS628511 , TPS628301 , TPS628501 Tool/software: In my design, input voltage is 5V, output is 3.3v, INDUCTOR is 2.2uh, load capacitance is 200uf(include output capacitor for dc/dc and decoupling…
Part Number: TPS62801 Other Parts Discussed in Thread: TPS62088 , TPS628503 , TPS628511 , TPS628513 , TPS628501 Tool/software: Hi expert,
Customer is looking into some of our power sequencing and have a question regarding the Logic Interface EN on two…
Ishiwata,
the datasheet of the SN62590DRVR is not publicly available. The main difference is a increased efficiency at light load condition.
There are newer devices available with improved efficiency and same functionality at a different pin-out.…
Part Number: TPS54680-EP Other Parts Discussed in Thread: TPS62810M , TPS54380 , TPS628511 , TPS628501 Hello,
Wondering if there's a minimum load requirement for the TPS54680-EP?
The plots show efficiency down to 0.5A, but will it operate with a lower…
