Part Number: TPS62864 Other Parts Discussed in Thread: TPS62684 I have couple questions about TPS62864
1) If I want to use three TPS62684 for three individual power rail (0.8V) , do I need to choose 3 different resistors to get different start-up output…
Part Number: TPS62864 Hello,
For the PG version of this device, can I2C be used to set the output voltage on the fly while the device is operating?
Thanks,
Michael
Part Number: TPS62864 Hi,
because the MOSFETs are built in the converter, we will test Vin-SW voltage by differential probe.
The SW(AC) is the L/S MOSFET, and max stress is 10V.
How about the H/S MOSFET(Vin-SW)? Is it same as the L/S MOSFET?
Thanks…
Part Number: TPS62864 Hi,
I designed in this part ( TPS628640BYCGR ). Now I cannot buy it anywhere.
Can some suggest a replacement or close part?
Thanks
Part Number: TPS62864 Hello, My customer is considering TPS62864. They would like to have Vout programed via I2C from first startup. But according to datasheet, no I2C access is allowed before EN gets high. Does TI have TPS62864 device option with Control…
Part Number: TPS62864 Hi Team,
Package outline is shown on both P30 and P37 of the datasheet. but which should I refer to? www.ti.com/.../tps62864.pdf
In P30, package dimension is D: max = 1.8 mm, min = 1.76 mm E: max = 1.07 mm, min = 1.03 mm
And…
Part Number: TPS62864 Hi Team,
My customer design TPS62864 for 3.3V to 1.05V and 3.3V to 0.65V in his system, the performance is good but have a question about the switching frequency. Customer checked the spectrum then found there are two ripple frequency…
Part Number: TPS62864 Other Parts Discussed in Thread: TPS62866 Hi,
We are using multiple TPS62864 (TPS628640A) in our design to generate following Voltage rails
Vout=1.2V, Vin=3.3, Iout=<4A
Vout=1.5V, Vin=3.3, Iout=<4A
Our use-case requires…
