Part Number: TPS62903-Q1 I already found TPS629xx-Q1 Functional Safety FIT Rate and Pin FMA (sffs465) but it does not state any Die Failure Mode and Failure Mode Distribution. If you can provide or refer a file it would be great, Thank you!
Part Number: TPS62903-Q1 Hi Team,
My customer is asking for tradeoff guidance between PCB area and Tj. Do we have any curves or data that we can share?
Thanks, Matthew Guibord
Part Number: TPS62903-Q1 Tool/software: I want to simulate the TPS62903-Q1 schematic using Cadence Spectre. But this model was encrypted & made error in spectre simulation environment . (like below)
ERROR (SFE-874): Cannot run the simulation because…
Part Number: TPS62903-Q1 Hi,
We have received a request from our customer to review the schematic related to this device.
The schematic also includes TPS65000TRTEQ1, and I would appreciate it if you could review this part as well.
However, due to…
Part Number: TPS62903-Q1 Hi Team,
SS need to get the material CTE value to support T- project.
Please let me know the CTE,Tg, Elastic modulus of TPS62903QRYTRQ1 .
1) Elastic modulus : Young's modulus)
2) CTE : Coefficient of Thermal Expansion…
Part Number: TPS62903-Q1 Hi Team,
My customer need small size solution because of Camera module application.
is it possible to use small size chip inductor with below condition?
I know that we have other solution but Customer need to make sure…
Part Number: TPS62903-Q1
Hi,
We are using TPS62903QRYTRQ1 buck in our design. It is given in datasheet, either 2MHz or 1MHz is the switching frequency.
How to set switching frequency for this buck?
Please help.
Thank you.
Part Number: TPS62903-Q1 Hi Team,
1. I was reading about datasheet of TPS62903-Q1. In 9.2.2.5.1 paragraph about output capacitor, here says 'Using higher value has a tighter DC output accuracy'. I'm confused that why and how the value of output capacitor…
Part Number: TPS62903-Q1 Other Parts Discussed in Thread: TPS62903 , Hi team，
When my board working in high temperature（RT=85℃）,the temperature of the measured plate is 100℃ when it is stable.
I found that after running for half-hour, the PG output…
