Part Number: TPS62933F Other Parts Discussed in Thread: LMR33620 , LMR43620 , Hi support team, This is a question about TPS62933FDRLR.
If 2pin (EN) and 3pin (VIN) are short-circuited, it is assumed that a voltage exceeding the maximum rated voltage…
Part Number: TPS62933F Dear TI experts.
I have read the datasheet of TPS62933F, but I do not understand the meaning of the parameters Ip and Ih, especially the term 'hysteresis voltage'. Could you explain it in detail? Additionally, in the recommended…
Part Number: TPS62933F Other Parts Discussed in Thread: TPS62933 Hi team,
My customer noticed that he can't make a customized simulation with more than one change. If he does more the prior change is reversed again.
He also claimed that a few days…
Part Number: TPS54538 Other Parts Discussed in Thread: TPS62933F Tool/software: Hi All,
I am using the TPS54538 in a design and are experiencing some issues.
NOTE: In this design I am comparing the TPS54538 to the TPS62933F (same values!) which…
Hello
I've been searching and found TPS62933F to be FPWM which will never make audible noise but it is kinda 3x more expensive.
is it worth it to go with this or stick with suggested solution above?
I mean tps62933f with 1.2mhz freq (or more?…
Part Number: TPS62932 Other Parts Discussed in Thread: TPS62933F Tool/software: My customer is currently evaluating and would like to use TI's TPS62932 not to enter DCM mode. It was confirmed that DCM mode was entered at 500mA at 600kHz and 200mA at 1…
Other Parts Discussed in Thread: TPS7A39 , TPS62933F Hi TI team,
I am looking for a converter that with below parameters:-
1. Dual input voltage i.e -27V and +27V.(DC input)
2. Required dual output voltage of -3.3V and +3.3V.(DC output)
Please…
Part Number: TPS62933P Other Parts Discussed in Thread: TPS62933F Hi TI team,
I have 2 questions regarding TPS62933P.
Below is my schematic. Fsw is 1200kHz, Vout is 1.5A.
The surrounding component are selected based on this recommended LC combination…
Part Number: TPS563300 Other Parts Discussed in Thread: TPS62933F Tool/software: Hi,
I need to design a DC-DC converter using Vin = 24V to 28V, Vout1 = 3.3V and Vout2 = 5V (Isolated output voltage).
Currently I am using TPS563300DRLR this regulator…
Part Number: TPS62932 Other Parts Discussed in Thread: TPS62933F , TPS54308 Hi all
My customer is using the TPS62932 in a standard buck configuration.
They also have to implement a 2nd isolated supply with these specs:
Vin= 12V ... 28V, Vout=5V…
