Part Number: TPS63020EVM-487 I follow the Application Report of Low-Power TEC Driver using TPS63020EVM-487 with R1 and R2 modifications in order to make the output voltage can be changed from 5 to 1,2v. I can see the current from Vout to Vin through the…
Part Number: TPS63020EVM-487 Hello,
Can I use TPS63020EVM-487 to derice a peltier cell?
If not, what is the proper driver/evaluation board for this application (driving Peltier)?
Thanks
Part Number: TPS63020EVM-487 Other Parts Discussed in Thread: TPS63020 , TPS61022 , TPS61020 Good morning,
I'm using the evaluation board of the TPS63020 in order to power supply the BG96 modem by Quectel. I have setup the evaluation board (change R1) in…
Part Number: TPS63020EVM-487 Other Parts Discussed in Thread: TPS63020 Tool/software: WEBENCH® Design Tools Hi guys,
my customer is using the EVM of the TPS63020DSJR and noticed that when trying to simulate on Webench, the tool automatically refers to…
Part Number: TPS63020EVM-487 Other Parts Discussed in Thread: TPS63020 , Hi Webmaster,
My customer was testing the TPS63020 for SSD power system.
Their system Vin=2.6V ~ 5V, Vout = 3.3V and Iout = 2A
When they are using TPS63020EVM and test under this condition…
Part Number: TPS63020EVM-487 Other Parts Discussed in Thread: TPS63020 , TPS63802 Hi Sir,
Currently my customer test TPS63020EVM, Vin=2.6V, Vo=3.3V, and they would like to support output current to 2A.
But TPS63020EVM can’t support 2A load, and we can’t…
Part Number: TPS63020EVM-487 Dear all
When I test the EVM, if there is not load, the ripple of Vout is up to 100mV, as below picture, after I adjust load current up to 0.5A, the ripple of Vout is normal with 20mV, Is it normal ?
Part Number: TPS63020EVM-487 Other Parts Discussed in Thread: TPS63020 Dear all
I test the TPS63020EVM-487, Vin is 5V, Vout connect to electronic load equipment.
1. When electronic load equipment is set to 20mA~25mA, the L1 inductor would have sizzle…
Hi,
I want to connect a current scope to the input and output of the TPS63020EVM-487. I have the following current probe available: Tektronic A622
PROBE TYPE Measurement/Accessory Type: AC/DC Split Core Signal Type: AC/DC Required Termination: 1 MegOhm…
Other Parts Discussed in Thread: TPS63020 , TPS63020EVM-487 All,
I purchased the TI TPS63020EVM evaluation module (EVM) which is set to 3.3-V output. Per the documentation "The TPS63020EVM-487 uses the TPS63020 adjustable version and is set to 3.3-V output…
