Other Parts Discussed in Thread: TPS63061 , TPS63060EVM-619 Hello everybody,
I am building a circuit using TPS63061, but I have found a problem with it,the schematic is this:
I have found a problem, I feed the TPS63061 and I have nothing connected…
Other Parts Discussed in Thread: TPS63060 , TPS63061 Hello, I have a question about TPS63060 and TPS63061. Page-7 of the data-sheet "SLVSA92B".
Are Figure-3 and Figure-4 opposite? TPS63060 has FB resistors. TPS63061 does not have FB resistors. Are these…
Other Parts Discussed in Thread: TPS63061 Hello, I'm using a 9V into a TPS63061 to give me a 5V rail, then use the 5V rail into a TPS62233 to give me a 3V rail. The 5V rail is used to run a solenoid at high currents for very brief periods (<20ms, with…
Other Parts Discussed in Thread: TPS63061 I am using the TPS63061 to regulate 3V-11V down to 5V. The circuit works fine except when I first power the circuit in the range of 6.2-6.8V. Then the circuit acts as if it is shutdown. If I start the circuit…
Other Parts Discussed in Thread: TPS63061 Hi guys,
Please advice could TPS63061 withstand continuously 12.6V supply voltage and 1A output current?
The application working range is 4.2V - 12.6V, which means a pure DC-DC Buck can't be used.
Although…
Thanks in advance for your help and for your quick reply.
Sorry, Yes. The GPRS isn't connected directly to the battery. My goal was show you the graph with the peak current and the dropout voltage.
Assuming the battery is able to deliver 2A, my…
Other Parts Discussed in Thread: TPS63061 Hi,
I'm considering to use Buck-boost DCDC converter by TPS63061.
The condition is as follows.
Input voltage : 4～7V
output voltage : 5V
load current : 100mA(Typ) / 500mA(Max)
The PS/SYNC pin is connected…
Other Parts Discussed in Thread: TPS63061 , TPS63060EVM-619 Looking at page 31 of datasheet there is a example of board layout http://www.ti.com/lit/ds/symlink/tps63061.pdf
My question is about the 5 circles below:
Are they just layout design…
Other Parts Discussed in Thread: TPS63061 In Datasheet TPS63061 it states 2A/1A Output Current at 5V in Buck Mode What does the 2A/1A refer to, are they different modes?
I am designing a 3.3V to 12V input 5V output PSU. Below 5V 1amp output, above 5V…
