Part Number: TPS650250 Hi,
I am using TPS650250 in my design to power ARTIX-7. The ouput from DCDC2 required is 1.8V. I have two options to select this. Either use resister divider network or ground the DEFDCDC2 pin. Which one is preferred and correct…
Part Number: TPS650250 Hi Experts,
My customer uses the total 162uF input capacitor for TPS650250 and asking us if this capacitor can be acceptable. There is a comment on the datasheet page 17 as below so it looks OK. I need your confirmation.
Regar…
Part Number: TPS650250 Hi Experts,
My customer is evaluating the propagation delay of voltage detector comparator. The spec is defined as below.
Customer connects PWRFAIL_SNS pin to L1 pin(1.1V). When power on and power off, this propagation delay is…
Part Number: TPS650250 Other Parts Discussed in Thread: TPS65217 Dear TI, we are using TPS650250RHBT to power a AM3352-based design, very similar to the BeagleBone. We are experiencing about a 10% failure rate in the field, where the TPS650250 dies / fails…
Part Number: TPS650250 Hello,
My customer would like to use TPS650250 PMIC in his application but the engineer is wondering regarding the ambient temperature range. It’s limited to 85°C but the Q100 version is up to 105°C.
The engineer would…
Part Number: TPS650250 Other Parts Discussed in Thread: LM26480 Hi Experts,
Is there any advantage with the internal compensation method of the TPS650250 to add a feedforward capacitor (if using an external feedback divider)? I do not see any in the…
Part Number: TPS650250-Q1 Other Parts Discussed in Thread: TPS650250 , Hei Team,
What ESD rating of TPS650250QRHBRQ1?
Although we checked datasheet and we confirmed with TI Customer support center,we could not find any information.
Best regards.
Part Number: TPS650250 Hi, all. I saw in the document "Powering the AM335x With the TPS650250" that we use RC circuit to do the Power-Off Sequence for the TPS650250. We can see that the sequence will DCDC1 to DCDC3 to DCDC2. When SYS_EN=0, a…
Part Number: TPS650250 Other Parts Discussed in Thread: AM3358 , , Hi team,
Could you give me advise for answering on following customer question?
<Customer question>
Can the minimum output capacitance requirement of 2.2uF at LDO2 be decreased, for…
Part Number: TPS650250 Other Parts Discussed in Thread: AMIC110 , TMDXICE110 I'm looking for for information on the lifecycle of the TPS650250. Specifically are there any plans to end production or sales on this part?
Thanks