Part Number: TPS65100 Tool/software:
Hi,
facing issue with TPS65100, after making device switch On , after couple of minutes ----boost converter voltage suddenly drop to 5V
followed all standard layout guidelines
1. i have tried with change in…
Part Number: TPS65100 Hi,
how to disable VGH, VGL & VCOM voltage?
is there any specific care need to be taken , while using this ckt in multilayer board?
Part Number: TPS65100 We are currently working on an automotive HMI display project and are using the ML9470-11/12 (80-segment LCD display driver) in our existing design. Due to availability / lifecycle concerns, we are now looking for a suitable alternative…
Part Number: TPS65100
Tool/software:
TPS65100 custom EVK not working
Below is the circuit
Voltage set at VIN = 3.3v
Current Drawn at no load 0.030 A
Wave form at SW pin =3.3V (FLAT DC)
Part Number: TPS65100 Hi,
I wanted to quickly verify that equation 8 in the datasheet on page 21 ( https://www.ti.com/lit/ds/symlink/tps65100.pdf#page=21 ) doesn't have a typo. Should the equation have " 2 *π*C8*R1" in the denominator as opposed to…
Part Number: TPS65100 Tool/software: Hi team,
During customer testing, they found that as long as AVDD is kept at 11.35V, no matter VCOM is set to 4.55V or 3.4V, the screen will not be pulled down when connected. However, the end customer's current…
Part Number: TPS65100 Hello,
My name is Thai.
Can you help review this schematic please.
Right now, I can only achieve Vo1 (9.5V).
Vo2 is giving me 1.1V and Vo3 is giving me 0V.
I'm trying to achieve VGH = 20V and VGL = -6.8V
Thank you very…
Part Number: TPS65100 Dear Sir,
We are using TPS65100 for Powering LCD where we need AVDD=10.4V, 400mA, VGH = 16V, 4mA, VGL = -7V, 4mA, and VCOM = 3.6V. We are facing some problems with the below-attached schematic, Some time start and build all power…
