Part Number: TPS65132 Hi
1.The TPS65132SYFFR chip uses a fixed output of ±5.4V and does not require I2C to adjust the voltage. Do the two I2C signal lines need to be processed? Can be left floating
2. D2 pin (AGND) is in the middle, with a 4mil…
Part Number: TPS65132 Hi team,
My customer ask if they could do I2C communication after enable bias voltage? and why the power sequence is different in different suffixes of TPS65132?
Part Number: TPS65132 Hello,
We tried using the TPS65132S device in a backlight application, but it was never able to turn on. Our needs are +90mA @ 5.2V, -40mA @ -5.2V. The S device has plenty of current capability, but start-up limitations or the "slow…
Part Number: TPS65132S
1. the Ilim_min, is it the data based on datasheet page 9, =0.9A?
2. for Vreg, should add + 500mV or add +200mV+500mV for 80mA application?
Part Number: TPS65132 We use the TPS65132B5YFFR with +/- 5.5V output preprogrammed. We don't programm the device. Around once every 20th startup the ouput voltage is +/- 4V instead of the +/- 5.5V. If the part is resetet with the enable pin, the voltage…
Part Number: TPS65132S In datasheet, it mentioned allow 100% assymetry.
-> Does it mean Vpos current should be within 2 times of Vneg output current?
-> Or does it mean we don't need to take any match of output current between Vpos and Vneg? Any current…
Part Number: TPS65132 Other Parts Discussed in Thread: TPS65135 , TPS65130 , TPS65131 Hi team,
Do we have any device like TPS65132 but wider Vout range (>+/-6.3V)?
I am checking TPS65135 but I2C interface is also needed.
Best, Zeming
Part Number: TPS65132 Other Parts Discussed in Thread: STRIKE Hi team,
When my customer did a small ball test with the whole phone, then they found that the TPS65132 failed, showing no positive or negative bias output, read I2C ACK, no response.
Small ball…