Part Number: TPS65132 Hi team,
Can the output voltage of tps65132 be changed or fixed at the factory? If it can be changed, where?
The current design is that tps65132 connects SMBus to IC write register through EC to output ± 5.7v, but always only…
Part Number: TPS65132S Other Parts Discussed in Thread: TPS65132 Dear TI,
We found the Iq value in TPS65132's datasheet. The typical value is 0.54mA.
1) Can you help clarify the test condition of this Iq value? Are the outputs(Vpos and Vneg) enabled…
Part Number: TPS65132 Other Parts Discussed in Thread: STRIKE Hi team,
When my customer did a small ball test with the whole phone, then they found that the TPS65132 failed, showing no positive or negative bias output, read I2C ACK, no response.
Small…
Part Number: TPS65132 Hi,
I got a quick questions here, as shown in the TI.com, we have several socket name, like TPS65132 A/B/L/S/W.
But there is only B/W/L version's user guide.
Do we have the S version's user guide?
Thanks.
Best regards…
Part Number: TPS65132 Hi team,
Help check if the default voltage of the TPS65132A0YFFR bias IC can be changed to 6V?
If can't change, pls help confirm in the power-up process, the timing of AVEE—MIPI Power on refers to whether the bias voltage can…
Part Number: TPS65132 Hi team,
There are some questions in TPS65132 design to consult you.
Since the project does not reserve another capacitor position, the risk of a 0402 capacitor needs to be evaluated.
1. What is the effective capacitance…
Part Number: TPS65132 Dear all,
We are using TPS65132WRVCR in our design. The part is configured at +/5.4V, 40mA, active discharge on both outputs. We noticed some differences with screenshots in the datasheet.
1 - On the following picture there is…
Part Number: TPS65132 Hello,
Our display bringup has to follow this power sequence, 1.8 -> 1ms delay -> Vpos 6V from tps65132 -> 1ms delay -> Vneg 6V from tps65132. Can we use the "ti,enable-time = <1000>;" parameter in dtsi for delaying Vpos and Vneg…
