Part Number: TPS65135 Tool/software: hi team,
Please help to provide MSL and Body marking for MPN "TPS65135RTER".
Its not available in datasheet.
Thanks,
Zeeshan.
Part Number: TPS65135 Other Parts Discussed in Thread: TPS65132 Hi
The customer of this chip supplies power to the MIPI display and sets the output to 5.5V and -5.4V. When no load is applied, the voltage is 5.5V and -5.4V. After the display is connected…
Part Number: TPS65135 Other Parts Discussed in Thread: TPS65132 , TPS65132S , TPS65130 Hi
Please help to suggest that the LCD power (VSP : +5.6V ,VPN: -5.6V /30mA) needs to meet the timing below.
TPS65135RTER : (VSP : 3~6V , VPN: -7~-2.5V /80mA) The voltage…
Part Number: TPS65135 Other Parts Discussed in Thread: TPS65130 I need to create +5V @ 45mA and -5V at 2mA for an analog signal processing circuit. The datasheet for TPS65135RTER says that it is designed for balanced loads such as AMOLED drivers. What…
Part Number: TPS65135 Hi,
I'm using the TPS65135 to generate a +/-2.5V dual supply for a bipolar analog to digital converter. After reviewing the spec sheet, I've chosen R1 = 100kOhm, R2=100kOhm, and R3=200kOhm which should provide me with the proper…
Part Number: TPS65135 Other Parts Discussed in Thread: TPS65132 I used the TPS65135RTE for my power circuit design. The nominal output positive (V o(ops )) and output negative (VO(NEG)) with load current can reach 80mA according to the data sheet, but I…
Other Parts Discussed in Thread: TPS65135 , TPS65150 Hi Team,
my customer is looking for similar device with TPS65135 but can achieve 2.5V min Vin, +8 Vout and -8V Vout. Please kindly add your comments. Thanks.
BRs
Given