Part Number: TPS65192 Other Parts Discussed in Thread: TPS65219 Tool/software: I am having trouble with the TPS65219EVM-RSM evaluation kit, as I do not seem to be able to find information on the orientation of the PMIC IC itself inside the socket.
…
Part Number: TPS65192 Other Parts Discussed in Thread: TPS65912 From datasheet, it stated that TPS65912 supports both SPI and I2C interface.
When configured to use SPI interface, can SPI access all the TPS65912 register ?
Section 7.18 stated that…
Part Number: TPS65192 Hi
It seems that VIH and VIL spec in datasheet had been put with wrong position. Would you please help check that the VIH should be referred with MIN, VIL should be referred with MAX.
http://www.ti.com/lit/ds/symlink/tps65192…
Part Number: TPS65192
Hi Team,
I have two question for the TPS65192.
On datasheet of TPS65192, it describes the 4 phase operation and 6 phase operation.
I am not sure the device will support 2 phase operation with GPM if signals sent to…
Part Number: TPS65192 Hello.
We are inquiring about the function of Exposed Thermal Die.
Is it possible to operate the CHIP by opening the Ex Thermal Die PIN without connecting it to the VGL PIN?
After confirming the contents, please answer.
Thank…
Other Parts Discussed in Thread: TPS65190 , TPS65198 , TPS65196 , TPS65194 , TPS65195 , TPS65192 , TPS65193 Could you share the TPS65199A/TPS65198/TPS65190/TPS65191/TPS65192/TPS65193/TPS65194/TPS65195/TPS65196 datasheet to me, thanks.
Thank you for your answer. I could use specjal level shifter but all I can find is a CD 40109 that works up to 20V. I also saw TPS65192 that has 9 outputs. I need only 3 or 4.
Part Number: TPS65190 Other Parts Discussed in Thread: TPS65192
Hi LCD team,
My customer is thinking to use TPS65190 at VGH=9V. How is VGH_min for operation?
DataSheet recomends Op condition of VGH=12Vmin 30Vtyp 38Vmax. But I think it will work…
Hello,
The UCC3806 is a dual output controller though it can be used in a flyback where only one of the outputs are used to drive the switch it might be better to choose a single output controller. Look at page 46 of the attached under General Purpose…
