Part Number: TPS65263-1Q1 My use case is with Vin = 5V. Datasheet says that there is internal V7V LDO that generates typ. 6.3V from Vin on pin 30 (pin name V7V).
Could you please confirm that V7V LDO is not only LDO?
In other words, there must be…
Part Number: TPS65263 Tool/software: Hi team,
What is the minimum off time of TPS65263?
I don't see this in the datasheet.
Customer wants to know the minimum input voltage when Vout = 4.98V.
Regards,
Peter
Part Number: TPS65263 Hi Ti team,
I have a question about TPS65263, Two of the three output voltages of TPS65263 are not correct.
power input : 12V
VOUT-1: 1V8 , but I get 1.36V
VOUT-2 : 1V2 1.199V, it is ok
VOUT-3 : 5V only get 2.375V
could…
Part Number: TPS65263-Q1 Other Parts Discussed in Thread: TPS65263 Tool/software: Could you please tell me how to calculate the power consumption of the model TPS65263-Q1? WEBENCH is not available for the model TPS65263-Q1, and the datasheet does not…
Part Number: TPS65263-1Q1 Other Parts Discussed in Thread: TPS65263 , TPS65263EVM-645 Tool/software: I have a design created in Webench for a triple regulator using the TPS65263.
I am unable to replicate the stability plots created in Webench with those…
Part Number: TPS65263 Tool/software: Hello,
I have included TPS65263 converter in my design in order to produce 5V, 3,3V and 1,8V with 5V input.
After power on, the output voltages measured are: 3.64V, 3.47V and 3.14V.
I you have any useful insights…
Part Number: TPS65263 Hello, everyone：
The following is the schematic diagram of our TPS65263 design, where LX1 meets 5V/3A,LX2 meets 3.3V/2A, and LX3 meets 3.3V/2A output. Problem description: Among the products in question received from our market…
Part Number: TPS65263 Other Parts Discussed in Thread: , TPS65400 Tool/software: Hello - I'm designing a non-standard, 2W inductive power system that will operate in the 100-1000kHz range. I would like to be able to adjust the secondary side voltage during…
Part Number: TPS65263-1Q1 Output voltage range for TPS65263-1Q1 Buck1, 2 and 3 with the use of external resistors at FB Pin is not been mentioned in datasheet.
Could you please provide the info.
Thank you!
