Part Number: TPS65313-Q1 Other Parts Discussed in Thread: TPS65313-EVM , LP2985 Tool/software:
Hello, I am planning to use the TPS65313-Q1 as a PMIC.
I am currently trying to use the TPS65313-Q1 to generate a 1.2V supply for operating your 28377S and…
Part Number: TPS65313-Q1 Tool/software: Hello,
We have designed a power evaluation board to evaluate the PMIC TPS65313-Q1 for an Automotive ECU application.
Our design closely follows the reference circuit provided in TI’s evaluation board for this PMIC…
Part Number: TPS65313-Q1 Tool/software: As a follow on question about computed the CRC for the config registers. I have the current copy of the data sheet for the TPS65313-Q1 Rev C. From section 11.9.14 is lists the polynomial x^8+x^2+X+1 (0x07). It…
Part Number: TPS65313-Q1 Tool/software: Hi,
We are developing a Level 3 autonomous tractor and are currently working on the power supply component identification for a 12V vehicle battery-powered system to drive a PMSM motor for the autosteer sub-module…
Part Number: TPS65313-Q1 Hello team,
My customer is going to evaluate TPS65313-Q1 in their application, so this team requested us to provide the driver source code or example code for this TPS65313-Q1 PMIC. Would you please send me the relevand codes…
Part Number: TPS65313-Q1 Tool/software: Hello PMIC Team,
In the SAFETY_CFG1 Register the SAFE_TO bit description has 3x the same intended value (00b) for different safe state time-out values. (page 122 in the DS)
Please advise for the correct value…
Part Number: TPS65313-Q1 Tool/software: Hello,
Is there a way to be able to connect the debugger (Lauterbach Trace 32) automatically and be able to debug in the code by setting breakpoints while WD_RST_EN is enabled. Without having a message target reset…
Part Number: TPS65313-Q1 Tool/software: Regarding the safety mechanism SM44: IO supply voltage monitoring mentioned in the document TPS65313-Q1_SLDA046_Safety_Manual_V2,
Is the VIO_OV considered as a latent fault?
Regards,
Khaled