Part Number: TPS65680 Tool/software: Hi
May i check?
Set OTPLDO_EN bit of the CONFIG2 reg for OTP, so after OTP, OTPLDO_EN bit will be OTP to 1. If OTPLDO_EN bit is always High in normal mode, is it OK?
thanks!
Part Number: TPS65680 Tool/software: Hi
In our architecture, the TPS65680 and other ICs use the same I2C bus. We've discovered that when LS_CNTRL is High, other ICs cannot access the I2C channel.
However, we need to be able to use I2C to adjust other…
Part Number: TPS65680 Hi Team,
Could you advise me on an alternative part for LT4380? P2P solution? OCP/ OVP/ Surge Protect/ Reverse Voltage Protect
Vin 5.5 - 65V, 20A
Thanks
Part Number: TPS65680 Hi,
Will TPS65680 have AEC-Q100 grade version in the future?
If yes, what is the schedule?
If no, will we have alternative part for automotive customer?
Thanks a lot.
Best regards, Cage.
Part Number: TPS65680 Hi
May i ask few questions as below:
1. Can i just use CLK1 ~ CLK 8 as below configuration and left rest of the CLK pin not used ?
2. How to configure the data of C1~C6 and D1~D3
3. Can i change the value of t5 and…
Part Number: TPS65680 Hi all,
Need your help for the VGL1, VGL2 voltage application question as following:
Does any issue or concern once the VGL1/VGL2 work in -2V or close to -0V as example due to the recommneded operating conditions for VGL1/VGL2…
Part Number: TPS65680 Hi, All
Customer program the OTP memory four times are OK, but can't program once more.
Is the a possible of OTP memory size not enough??
If yes, may I know how much size of OTP memory?
