Part Number: TPS6594EVM Tool/software: SCH_of_PMIC.pdf
Dears
Two power boards were designed using TPS659411 to supply power to the DSP core, BUCK1+BUCK2+BUCK3+BUCK4. Board A uses a 12 layer PCB design with capacitors placed on the bottom layer, while…
Part Number: TPS6594EVM Tool/software: it shows HW connected, but no devices detected
I used default I2C settings, but it does not connect, so I switch to SPI mode on GUI without changing jumper on EVM, connected, but no devices detected.
Can…
Part Number: TPS6594EVM Other Parts Discussed in Thread: TPS6594-Q1 Tool/software: Hi,
there are 3 questions.
1. Is there any detailed information about SPMI? In the datasheet, there is no description except for GPIO
2. Does the board support SPMI…
Part Number: TPS6594EVM hi,
1: I notice my TPS6954 1212 EVM has 5 Phase configurations, could you tell me what is "1212" Phase config?
I search it "1111" is Phase config 1, "1213" is Phase config 2. Please see my picture.
if we choose wrong config…
Part Number: TPS6594EVM Tool/software: Hi,
I have a query about the TPS6594EVM evaluation board, specifically the TPS65941212EVM variant.
I would like to know if the PMIC on this evaluation board is unprogrammed (using default NVM settings - as I…
Part Number: TPS6594EVM Hi, all:
I want to turn on and turn off TPS6594 LDO, BUCK output in the different time. because my design has requirement for power up and down sequence.
1: when PMIC is working, all LDO and BUCK output normally, if I am using…
Part Number: TPS6594EVM hi, all:
I want to set TPS6594EVM "LDO-2 SLOW RAMP" as 3mv/us, but I don't find which register can be set in the datasheet for "LDO2_CTRL", could you tell me which register can I set?
and I want to set by the GUI, it is still…
Part Number: TPS6594EVM
Hi, all:
If I want to download file by SPI mode, what should I do?
I change some jumpers in the EVM board.
1st step: J7,
SPI_EN connected with MCUVCC;
GPIO2 connected with SDA_I2C2/SDO_SPI;
2nd step: J15,
SCL_I2C2…
Part Number: TPS6594EVM hi, all:
I want to control TPS6594EVM all power output, sometimes I want to power off PMIC all output(LDO and BUCK), could you tell me what is register can control all power off?
and if I just want to power off by pull up or…
