Search tips
Showing 51 results View by: Thread Post Sort by

  • TPS706: TPS70618DRVR

    TI Thinks Resolved
    Part Number: TPS706 TPS70618DRVR is powered by 3.3V regulator(LDO) and the output is connected to VOC(volatile organic compounds) sensor IC which works on the minimum voltage of 1.68V and nominal voltage of 1.8V. the enable pin of the TPS70618DRVR is…

  • TPS706: TPS70618DRVR

    Part Number: TPS706 Other Parts Discussed in Thread: TPS782 TPS70618DRVR is powered by 3.3V regulator(LDO) and the output is connected to VOC(volatile organic compounds) sensor IC which works on the minimum voltage of 1.68V and nominal voltage of 1.8V…
    • Answered

  • TPS706: can pin 4 connect capactior?

    Resolved
    Part Number: TPS706 Other Parts Discussed in Thread: LP2992 Hi Team, My customer is considering TPS70625DBVR as alternative of LP2992AIM5-2.5/NOPB due to availability issue. Now pin 4 of LP2992AIM5-2.5/NOPB is connecting capacitor to reduce noise…
    • Resolved

  • TPS706: Fixed output voltages up to 5 or 3.3V?

    TI Thinks Resolved
    Part Number: TPS706 Hi Team, The datasheet of TPS706 says there are fixed output voltages up to 5V: But the available devices only go up to 3.3V: I expect the latter info to be right ant the first to be a typo. Is that correct? Thank you,…

  • TPS706: TPS706 Reverse current

    TI Thinks Resolved
    Part Number: TPS706 Hi! I would like to know if the Irev of the TPS706 is considering the current through the output resistors. For example if the input voltage is 0V and the output voltage is 3V what will be the total current passing through the…
    • Answered

  • TPS706: Overshoot at start up

    Resolved
    Part Number: TPS706 Other Parts Discussed in Thread: TPS709 , , TLV755P Hello team, My customer uses TPS70618 for 3.3V/1.8V conversion. My customer observes the output voltage goes as high as 2.25V when VIN start up and it takes a couple of ms to…
    • Resolved

  • TPS706: TPS706: [TPS70633] can the TPS706xxDRVR (WSON-6 package) LDO be used with a 2 layer PCB ???

    TI Thinks Resolved
    Part Number: TPS706 I know that the thermal vias on a WSON-6 package exist inside of the ground thermal pad - can these 2 thermal vias be deleted from the Ultralibrarian model for use on a 2 layer PCB? Or do I need to use the SOT-23-5 package?? thanks…
    • Answered

  • TPS706: TPS706 reverse current blocking threshold

    Resolved
    Part Number: TPS706 Hi. If Vout is reinforced by another regulator, and Vin is allowed to fall below the Vout voltage, I expect that the reverse current blocking will cause the LDO to turn off. Other posts have suggested that this isn't the case. Consider…
    • Resolved

  • RE: TPS706: Supercap management an decoupling

    Hi Antonio, What is the load current in the customers application? Thanks, - Stephen

  • TPS706: Inquiry about replacement products for the same spec

    TI Thinks Resolved
    Part Number: TPS706 Other Parts Discussed in Thread: TPS782 , TPS709 , TPS7A05 , TPS7A03 , TPS7A02 Hi, TI Support Team I tried to use the product TPS70618DRVR, but I am looking for a replacement due to a delivery problem. The TPS70618DRVR is enabled…

Didn't find what you are looking for? Post a new question.