Part Number: TPS74301 Hi Support Team.
In the Qualification Summary, the results of ESD-HBM and CDM are described as "See data sheet". However, the datasheet does not show the results of ESD.
Please tell me ESD data (HBM data , CDM data) of TPS74301RGWR…
Part Number: TPS74301 Hello In the datasheet of TPS743xx (Revised August 2010) there is the following section:
INTERNAL CURRENT LIMIT
The TPS743xx features a factory-trimmed, accurate current limit that is flat over temperature and supply voltage…
Other Parts Discussed in Thread: TPS74301 , TPS74901 Hi All,
Now our customer has evaluated TPS74301 and TPS74901 and then they have question about Vout accuracy. Is the Vout accuracy listed in electrical characteristics is guaranteed over temperature…
Other Parts Discussed in Thread: TPS74301 Hi,
We recently made a batch of boards of an old design and are noticing a small failure rate on some TPS74301 devices. We have 3 failures out of some hundreds of devices.
Connections:
In, Bias, Track…
Other Parts Discussed in Thread: TPS74301 Hello,
I am using the TPS74301 LDO to generate a rail that is supposed to simultaneously track a reference voltage during startup. The datasheet says " By properly choosing values of resistor divider used to…
Part Number: TPS7A84 Other Parts Discussed in Thread: TL1963A-Q1 , TPS74301 , LM1086 , LM317 Hi Experts,
When looking at the LDO thermal resistance, they are the same between TPS7A83/84/85. Then how do i choose the LDO based on input/output voltage…
The TLV1117 theta ja number uses a standard jedec high k board that uses 4 layers with 2oz copper on the top and bottom. Board is 3x3. You can find a lot of thermal information at www.ti.com/thermal . There are several high current ldos that have a theta…
Other Parts Discussed in Thread: TPS74301 , TPS51100 Question/Problem:
Recommend replacement LDOs for 3.3V to 1.9V @ 1.9A, 3.3V to 1.1V +/-1.5% @ 1A and 1.8V to 0.9V @ 700mA for DD2
Answer: TPS75801, TPS74301 and TPS51100 are the only choices due…
Other Parts Discussed in Thread: PTH05050W , TPS74301 Hello,
I am in the middle of designing a power circuit for an FPGA based system. I am using the PTH04000 and the PTH05050W to derive the voltages for the core and I/o respectively. I am also using…
