Part Number: TPS74401-EP Hi,
From the datasheet, this part is hi-rel and supports aerospace application. Does this mean, there is some level of confidence that it is meeting or have some radiation info?
Thanks.
Part Number: TPS74401-EP We are using the TPS74401RGWT LDO to generate 3 voltages (1.2V, 0.9V, and 0.85V) from a 1.8V input.
Our Vbias is at 5.0V with the recommended 1uF decoupling capacitor. Their PG outputs are all tied together with a 4.7K pull up…
Part Number: TPS74401-EP Hello,
I am planning to use TPS74401MRGWREP.
The design configuration as follows,
1. Vin = Vbias = 3.3V
2. Vout = 2.5V (Vin-Vout = 0.8V)
3. Iout = 2.3A
But in Typical characteristic Dropout voltage vs Iout relationship, Dropout…
Hey Jashandeep,
All TI parts are tested to our datasheet parameters before being shipped.
With regards to the qualification testing, this device is tested with JEDEC standards at the time of release. The link provided highlights the conditions and stresses…
Part Number: TPS74401-EP Hi there,
Currently, i am developing an electronic system using the TPS74401-EP LDO.
The TPS74401-EP is used to drop a 3.3V main power to 1.2V Processor core power.
I expect that an output current of a 1.2V supply power is required…
Part Number: TPS7A4701-EP Other Parts Discussed in Thread: TPS74401-EP Team,
I have a design using both the TPS7A4701-EP and the TPS74401-EP and wondering if I apply an external voltage source to the output while the regulator is disabled if it will cause…
