Part Number: TPS746-Q1 Tool/software: Dear TI experts,
My customer modified their schematic including TPS746-Q1 due to their end customer's request. Could you check the points are available or not?
1) Is it okay to add C145(0.1uF) on EN pin?
2…
Part Number: TPS746-Q1 Other Parts Discussed in Thread: TPS784-Q1 Hello team,
My customer has discharge quickly need after turn off the LDO, they only see TPS746-Q1 has the Rpulldown which can help achieve this, but the current 1A is too big.
Can…
Part Number: TPS746-Q1 Hello Team ,
Good day..
This is Swanand from Component Engineering , Flex – India. We are working on some of your manufacturing parts and require information in the below table.
Please help us to complete the table by…
Part Number: TPS746-Q1 hi, TI Experts
The TPS746-Q1 has an internal pulldown MOSFET that connects an Rpulldown resistor to ground when the device is disabled.
When VIN is less than VUVLO, the output is connected to ground with a pulldown resistor…
Part Number: TPS746-Q1 Other Parts Discussed in Thread: TPS746
Hi team
My customer Geely wants to know what's the maximum reverse current when the output voltage is biasd above the input voltage(Vout>Vin+0.3V) and no the external schottky diode. Would…
Part Number: TPS746-Q1 To whom it may concern,
Below is the LDO circuit in my design. However, I measure the output and it shows 3.0V instead of 2.5V.
I have a 2nd circuit with same configuration, but Vo = 1.0V. I measure it and it show 1.02V
I…
Part Number: TPS746-Q1 Tool/software: Hi team,
My customer wants to find a LDO that has adjustable output voltage. They want to control the voltage by I2C. I didn't find such device.
Is it feasible that the MCU controls the output voltage through…
