Part Number: TPS748A Hi TI experts,
For TPS748A LDO, can we assume the same zero/pole location as described in TI SNVA020B and SNVA167A? If yes, can you please confirm the pole P1 and Ppwr locations shown in below plot?
If not, can you please provide…
Part Number: TPS748A Tool/software: Hi TI experts,
I have a few questions for TPS748A.
1. Confused with Vdropout spec in datasheet. With BIAS connected to 5V, does the Vdrop satisfy for 3.3V to 2.5V, 2.5V to 1.8V, 1.8V to 1.2V, and 1.8V to 1.0V applications…
Part Number: TPS748A Hi,
my customer is confused by contradicting Vbias parameters in our datasheet:
In section 7.1.2 (p17), the datasheet states that Vbias must be >= Vout + 1.9V
The recommended operating conditions say Vbias nominal is Vout…
Part Number: TPS748A Hi There,
In TPS748A diagram, the internal reference and SS are separated to internal EA, and no Noise Reduction resistance available. But per section 7.1.3, the SS cap also serves as a filter to internal reference voltage.
…
Part Number: TPS748A-Q1 Tool/software: I've read the other posts but am still confused about the drop out and the bias conditions. I would like to use the part since it has the soft-start feature to regulate from 5V to 3.3V using the part with IN and…
Part Number: TPS748A Other Parts Discussed in Thread: TPS74801EVM-177 , Tool/software: The TPS748A datasheet on the first page notes:
Stable with any output capacitor >= 10 uF
which is also reflected in table "6.3 Recommended Operating Conditions…
Part Number: TPS748A Other Parts Discussed in Thread: LM317 , LM338 Tool/software: Hi,
We are in need of low dropout regulators for burn in application board which has the ambient temperature of 80deg Celsius.
Suggest the part for the below specifications…
Part Number: TPS748A
Tool/software:
My application requires converting 3.3V to 1.8V. TPS748A is used for voltage conversion. There is no auxiliary power available in the system for Vin is tied with VBias. As per datasheet section 7.4 Device Functional…
Part Number: TPS748A Other Parts Discussed in Thread: TPS74801
Hi team,
I'm considering to exchange TPS74801DRCR to TPS74801AWDRCR.
I think there's no big differnce and it can be easiliy changed without changing circuit around this device.
But…
Part Number: TPS748A Tool/software: Hello TI Support. The TPS748A data sheet states that VSS = 0.4V and ISS = 7.5uA, but since I would like to design with higher precision, I would like to know the MIN and MAX of VSS and ISS.
