Part Number: TPS759 Tool/software: Dear TI,
I'm using the TPS75901KTTR, with 5V input voltage (from a power supply) and 3.3V output voltage. From the datasheet, it says "Quiescent current is 125 µA at full load", it led me to believe that the input…
Part Number: TPS759 Dear Sir/Madam,
My team is interested in using the TPS75901KTTR, 5V input to a 3.3V output, with an input fuse. Is there a recommended fuse value and type that can be used?
Thank you.
Best regards,
Calvin
Part Number: TPS759 Hi.
We are using TPS75925 to produce 2.5V in our system.
During operation, we recognized subsystem is out of power, and by detecting all power rails, the output of TPS75925 is dropped to 500~600 mV. In our system, there is no…
Part Number: TPS759 Other Parts Discussed in Thread: TPSM82866A Hi TI support team,
I’m using TPS75925 kttt in my design, my input voltage is 5V and using fixed output voltage 2.5 V and output current is about 4-5 A. Could you please help me with input…
Part Number: TPS759 Hi Team,
We are using the TPS75901 part in our 5.5V to 5V conversion application.
During testing, if we load the LDO with 4.34 A, the output voltage is dropped to 4.64V. In the datasheet, it was mentioned that the maximum tolerance…
Part Number: TPS759 In the TPS75933KTTR data sheet, on page 2 there is a schematic for a fixed voltage output at 3.3V with a valueless resistor between PG and Vo.
What is the value of this resistance?
Best regard.
P.Congré
Part Number: TPS759 Hii,
Good day!
We are looking for a LDO part with a +5.5V as maximum input and 5V output @ 6A at least with maximum operating temperature of 85 degC. Your Customer Response team suggested the above mentioned TPS759 part. Refer…
Part Number: TPS759
Hi Experts,
Good day.
Can you please confirm if the body part (for heatsink) of the OPN: TPS75901KC in TO-220 package is either connected to GND, OUTPUT, or no connection at all and recommended to isolate from its pins.
Thank…
Part Number: TPS759 Other Parts Discussed in Thread: TPS7A85 Hi team,
TPS759 has max 7.5A output, do we have solution to achieve 10A? Like paralle two LDO? Thanks.
Part Number: TPS759 Hi,
We are using TPS75933 LDO regulator in our design.
Please let me know we should I connect the power pad pin of the LDO.
Can I connect the power pad to Ground?
