Part Number: TPS763-Q1 Other Parts Discussed in Thread: TPS763 Team,
See differences in DS for TPS763 and TPS763-Q1:
TPS76350DBVT :
TPS76350QDBVRQ1 :
Why a such difference between the 2 RθJC(top) with the same package and no noticables…
Part Number: TPS763-Q1 hi,
In TPS763xx-Q1's datasheet, there are two MPN: TPS76333QDBVRG4Q1 and TPS76333QDBVRQ1 for one part TPS76333-Q1.
I can't found any difference description for these two MPN, could you please confirm that they are exactly same…
Part Number: TPS763-Q1 Dear team,
Customer want the quality report of failure rate of TPS76301QDBVRQ1. But have confirmed with customer that the DPPM data in TI.com could not satisfy their requirement. So it is better if have any quality report, if…
Part Number: TPS763-Q1 Hello,
This is related question to the previous one.
ESR mentioned in datasheet for stable operation is effective ESR (parallel combination) of all the capacitors connected at the output , correct?
For experiment, we had…
Part Number: TPS763-Q1 Other Parts Discussed in Thread: TPS763 , , TLV767 , TLV767-Q1 , TPS7A24 Hello,
We are looking for LDO suggestion in a high power inverter (150kW) application.
High common mode noise is expected to be present in the ground…
Part Number: TPS763-Q1 Other Parts Discussed in Thread: TLV702-Q1
Hi,
Currently I got a question from customer that TPS763-Q1 datasheet mentioned 0.3-10 ESR is needed for a 4.7uF Output capacitor. I checked our part with Rohm's BU33SD2MG(currently…
Hi Abhijith,
The TPS763-Q1 does not have a specification on the maximum output capacitor it can drive, but it needs to meet the following listed conditions:
Please note when the LDO is driving large capacitance, the LDO may enter into the current…
Part Number: TPS763-Q1 Dear TI Team,
could you please help to clarify following question.
We would like to use the Ceramic Capacitor with Low ESR as output Capacitor for TPS76301-Q1 LDO (the ESR plot of the capacitor to use below).
According to…
Hi Paul,
While it is possible to have an output voltage above 5 V for the adjustable device, the TPS763-Q1 family is only tested and specified for a maximum output voltage of 5 V. While the maximum dropout is not specified for a 5.7 V output, if you…
