Part Number: TPS77401-EP Hello,
The adjustable version does not appear to have a spec for feedback voltage tolerance at 25C.
The FB voltage in the datasheet is indicated as typically 1.1834-V. Is there a spec for initial accuracy at 25C ?
Regards,
S…
Part Number: TPS77401-EP Other Parts Discussed in Thread: ADC128S102 , TPS774 Good Morning,
I am considering the use of this part to supply power to a TI 12-Bit ADC (ADC128S102 series, both VD and VA supplies).
From first analysis it appears that both…
Shimizu-san,
Below is the thermal data from TPS77401MDGKREP
Result- Theta JA-High K (standard datasheet value) 161.0
Result-Theta JC, top (standard datasheet value) 54.2
Result-Theta JB (standard datasheet value) …
Other Parts Discussed in Thread: TPS77401-EP I am using TPS77401-EP in an application that must withstand a large input voltage drop out. To handle this, I will need to place about 1,100uF (qty 50 of 22uF, X7R ceramics) of capacitance on the device output…
I am using TPS77401-EP in an application that must withstand a large input voltage drop out. To handle this, I will need to place 1,100uF (qty 50 of 22uF, X7R ceramics) of capacitance on the device output. Are there any stability concerns to be aware…
Shihab,
I attached all the extended temperature products for linear regulators with input voltage greater than 10V. There is only one part that allows the full VIN; it is the TPS71501-EP (adjustable output voltage). However the maximum rated output current…