Part Number: TPS7A10 Hi,
I found when Vin1.1 to vout 0.6, if our vbias = 3.3V, Vout have no output.
We need set to Vbias = 1.8V, it will normal output 0.6V, is it normal?
Vbias have any limitation in this condiction? thanks!
Jeff
Part Number: TPS7A10 Other Parts Discussed in Thread: TPS7A05 Hi Team,
my customer is searching for 0.5V/0.6V fixed Vout LDO device. I see there is TPS7A1x series which can support the voltage.
since application is wearable which care much on Iq. Device…
Part Number: TPS7A10 Hi Team,
Greetings for the day.
We are using the TPS7A1025 LDO in our Layout Board file. I had attached the images of the Board file and Schematics. Please review the layout and share your feedback with us.
The PCB we are using is of…
Part Number: TPS7A10 In the datasheet for this part is states that the MAX ESR should be less than 250mohms. However, for caps the ESR varies vs frequency. At what point is this MAX ESR value supposed to be compared for output capacitor determination…
Part Number: TPS7A10 Other Parts Discussed in Thread: TPS74901 , TPS74701 , TPS74801 , Hi there, I am looking for an LDO with the following specifications: VIN = 1V1 VOUT = 0.8V IOUT peak = 150 mA Vout tolerance = 0.78V min - 0.82V max
1. Would the TPS7A1008PDSE…
Part Number: TPS7A10 Dear Team
Good day!
Our customer want to use the TPS7A10 in their circuit , VIN 3.3V VOUT=1.8V IOUT=200mA , they want to confirm that , whether they can connect the Vbias and Vin together .
Best regards
Leon.liu
Part Number: TPS7A10 Dear team,
Customer use TPS7A10: input voltage 3.3V, output voltage 2.8V, load current 30mA. The output voltage could not reach 2.8V when Vin is 3.3V, only the Vin is 3.55V that Vout could reach 2.8V. Could you kindly help analysis…
Part Number: TPS7A10 Hi Support Team
Can you confirm that the GLOBAL UVLO will activate tactive discharge circuitry in the "p" version?
Customer wants this to trip if the voltage starts to fall.
Thanks
Jeff Coletti
Part Number: TPS7A10 Other Parts Discussed in Thread: TLV705 Hi Sir
May I know TPS7A10's height is 0.3mm or 0.4mm
Have any TI LDO solution the height is under 0.3mm?
Part Number: TPS785-Q1 Other Parts Discussed in Thread: TPS7A13 , TPS7A10
Hi TI,
Good day,
We have a requirement of 1.1V to 0.75V/300mA .
Vin(Minimum):1.078volts
Vin(Max):1.220 Volts
Iout(Max);300mA
Vout typ:0.75 volts
Will you recommend any LDO. for above…