Search tips
Showing 111 results View by: Thread Post Sort by

  • TPS7A39: External reference for TPS7A39

    Part Number: TPS7A39 Tool/software: Hello, We are planning to use an LDO TPS7A3901DSCT in our new design. We want to use an external precise reference instead of an internal reference. As we understand from the datasheet the external reference could be…

  • TPS7A39: need a dual power output 32v vin, vout 42/200mA, -42V/200mA

    Part Number: TPS7A39 Tool/software: HI Sir we would like to design a power for TI/MUX VIN:32V ,Vout 42/200mA VIN:32V ,Vout -42/200mA Could I use the TPS7A39 to achieve it? thanks

  • TPS7A39: Driven by TPS65131 and the output is 0V

    Part Number: TPS7A39 Other Parts Discussed in Thread: TPS65131 Tool/software: Hello E2E Experts, Good day. I have used TPS65131 to generate +14V and -14V and used TPS7A39 to step down the output voltage to +12V and -12V respectively. Whenever a load…
    • Answered

  • TPS7A39: Only negative voltage needed.

    Resolved
    Part Number: TPS7A39 Tool/software: Hi TI, I only need negative voltage output. What should I do with OUTP and FPB pins? Can I leave them floating? Are there any better options than TPS7A39 to provide -0.2V voltage? TPS72301 is not an option since max output…
    • Resolved

  • TPS7A39: TPS7A39

    TI Thinks Resolved
    Part Number: TPS7A39 Tool/software: Ti Team, Planning to use TPS7A39 dual regulator.We need +5V at OUTP (pin10) and -5V at OUTN (Pin 6). Below is the questions: 1.Do I need to give +12V @INP (Pin 1) and -12V @INN(Pin 5) ? 2.If I give +12V @INP (Pin…

  • TPS7A39: PDN model.

    Part Number: TPS7A39 Tool/software: Hi, I'm using the LDO TPS7A39 and I would like to simulate my PDN with Ansys Siwave. Where I need to add the resistance and inductance of the Source, ESL ESR. Which values should I use for this device to have accuracy…
    • Answered

  • TPS7A39: Do you have an LDO with less noise?

    Resolved
    Part Number: TPS7A39 Other Parts Discussed in Thread: TPS7A47 , TPS7A94 , TPS7A30 , LMP7731 , TLV2460 Tool/software: Hi, I'm designing a very low noise amplifier circuit. Do you have something better than TPS7A39? I need to regulate negative and positive…
    • Resolved
    • Answered

  • TPS7A39: Need LDO IC (3.3V Input to -2.5V & +2.5V Output in a single IC)

    Resolved
    Part Number: TPS7A39 Dear forum, I'm looking for an LDO which can generate +2.5V & -2.5V output in a single IC and the input should be 3.3V.. I found TPS7A39 while searching.. but it need both positive and negative inputs..Since i have only small…
    • Resolved
    • Answered

  • TPS7A39: Design of a symmetric power supply

    Resolved
    Part Number: TPS7A39 Other Parts Discussed in Thread: TPS65131 Hello, Could you recommend me a simple input voltage regulator with symmetrical output? I will use it to generate a +/- 12V voltage for the design of a wallbox. Some time ago, I used one of…
    • Resolved

  • TPS7A39: TPS7A39 Simulation fails to converge when loaded

    Part Number: TPS7A39 I have put together a simple bipolar power supply base on the application notes in the TPS7A39 datasheet. The PSpice simulation works fine as long as the output is unloaded, but I would like to add components to the output to see…

Didn't find what you are looking for? Post a new question.