Part Number: TPS7A45
Tool/software:
Hello,
I would like to know if it is fine to drive the shutdown pin with an 8V voltage source (a battery) or 5V voltage source (USB). In addition, the pin is pulled down to ensure that the regulator is off when…
Part Number: TPS7A45 I am looking for an LDO with a ・ 5.5V 1.2A (peak max.) output and I am thinking of using the TPS7A4501DCQ. Is there any problem even if the input/output voltage difference is 0.5V?
Part Number: TPS7A45TPS7A45xxEVM-385 evaluation module (EVM) sharing same characteristics in case of i/p C1 and o/p C2 capacitor, however their packages are 1210 & 1206. Is there any specific reason behind this reference architecture? As you know the…
Part Number: TPS7A45 Other Parts Discussed in Thread: SN65LVDS2 , SN65LVDS1
We are using a cascaded configuration of TPS7A4501 to supply 2x SN65LVDS1 and 2x SN65LVDS2 so around 30mA max.
As we are powering the circuit in sequence and we can't soft…
Part Number: TPS7A45 Hi,
Good Day. Is the TPS7A4501DCQT stable when driving low ESR Tantalums? My customer needs to create a small time delay between two different rail voltages powering up and including an RC network on the output of the TPS is his…
Part Number: TPS7A45 Hello,
Can you please share the correct plot for Figure 15 in the datasheet for /SHDN current vs. temperature? It looks like Figure 13 was incorrectly copied here instead.
Thank you,
-Kevin Ginunas
Part Number: TPS7A45 Hi.
I have a question about the "Figure 2. Dropout Voltage vs Temperature" table in "SLVS720F – JUNE 2008 – REVISED NOVEMBER 2015". The horizontal axis of this table is "TA – Free-Air Temperature – ° C", but isn't it the junction…
Part Number: TPS7A45 Voltage - Output (Max) for item TPS7A4515DCQT because the value cannot be limited. It also creates a short circuit in the card layers. T he product does not have the features suitable for our design card.
I want to return the…
Part Number: TPS7A45 Dear TI
I have two questions about the "TPS7A4501" data sheet.
Please answer the following two points.
(1) The data sheet stated that the reference voltage (Vadj) was about 1.21V ± 3% under the "full range" condition. I…
