Part Number: TPS7A4501EVM-385 Hello Team,
may I ask you which version is soldered on the EVM, please? The BOM in the user's guide lists all versions for U1:
Thank you and best regards,
Hans
Part Number: TPS7A4501EVM-385 i will have the output set to 12V with 13.2 volt input. if i lose my primary voltage i have battery that may only supply 11 volts. would this regulator pass the 11 volts or would it shutdown or drop the output more.
Nathan,
Thank you for the plots.
I will confer with designer, and will also schedule time in the lab to verify behavior on my lab boards.
I noticed that you are using the commercial version of the device. They do share the same base design, but…
Hi Yuto,
Please find a startup waveform below. Vin is Yellow, Vout is Pink, and /SHDN is Blue. This was taken on the TPS7A4501EVM-385 with no load and no modifications to the EVM.
Very Respectfully,
Ryan
Hi Fujiwara,
Yes it is possible to increase the output capacitor value. Doing so will decrease the magnitude of a transient response; however, it will also increase the duration of the transient response. We recommend prototyping with your intended…
