Part Number: TPS7A52 Hi, I have a problem with TPS7A5201 layout. Schematic is attached. Input voltage is 4.2V and output voltage is set with R13 and R14 to 3.8V. If layout is not loaded works good, I measure stable 3.8V on output.
But if I add load 500mA…
Part Number: TPS7A52-Q1 Other Parts Discussed in Thread: TPS7A52 I found a couple of bugs with the unencrypted SPICE model this device.
1. The text file, line 34, is missing a comment character. This prevents TINA from importing the model- please fix this…
Part Number: TPS7A52TPS7A5201WQRTKRQ1 part is designed as shown in the image above. The enable pin is driven from the open drain enable output of sequencer. The sequencer VCC is 3.3 V. All the enable outputs are pulled high (3.3V)using a 10kohm pull…
Part Number: TPS7A52 Dear TI,
I am using TPS7A5201RPST and completed the schematic and PCB. The input supply to TPS7A52 is VUSB and output is 4.95V. Can you please review below and comment. Thank you.
Below is the PCB for the above schematic, the thin…
Part Number: TPS7A52-Q1 Hello TI team
When do you release new version of Data Sheet?
I prefer to have the data sheet below speck is referred.
VEN (Enabel Voltage Range)
Part Number: TPS7A52 Hi Team
I created a 3.3V output Schematic with TPS7A52.
I have inserted a File, so please check it and comment. Sep_17_TPS7A52_3.3V_2A_Design_File_Shintomi.pdf
Part Number: TPS7A52-Q1 Dear,
I'm unable to find the initial tolerance of the feedback voltage in the datasheet of the component, there is only a typical value.
Could someone give me the min and max value?
Part Number: TPS7A52-Q1 Hello,
I saw on the datasheet of the TPS7A52-Q1 that the deviation of the accuracy of the output voltage (without bias and between -40°C and +125°C) is -1% and +1%.
I would like to know if it includes ageing.